volvo vnl exhaust

Where are you located? I scavenged some parts from a yard near Detroit that had a bunch of Volvos, I bet they'd have one there for less than new.

 

how many bends does it have? you might be able to get a couple pre bent elbows and some straight pipes and clamp it all together

 

That's what I was going to say see if you have enough room to clamp some bends or do a straight pipe and clamp a flex pipe where you need the bends, I just saw a 3' long 5" diameter flex pipe on ebay for like 30 bucks and 5' straight piece for 44 bucks

 

So you figure 30 for the flex 44 times 2 for the straight pieces would put you at like around 150 shipped, and that gives you 13' of pipe. Then just add some clamps to the cost, which I think are around 10 bucks a pop

 

Maybe this help???

http://www.grpipes.com/heavytruckexhaustsystems.asp

http://www.grpipes.com/heavyduty/Volvo.pdf

 

If your truck is 08 or newer, watch the material , I tried to save some $ for my D13 exhaust pipe, but I've been told needs some special threated thermal resistant steel to take the DPF high temperature;

this site http://www.truckpaper.com/ beside selling trucks, offers the parts search ; type part # and search, shows places where they have it in stock;
shows available here;http://www.truckpaper.com/list/partssearch.aspx?partnum=20866416