The best CB with SSB?

I would suggest a shop with a good rep look at it, problem is anymore there are more bad shops then good ones..

 

http://www.radiomods.co.nz/framescbsite.html

 

My grant lt

 

They are much the same the LT is a newer one .

 

If you run out to Ontario Cali then the cb shop behind the west side TA,Chris at the radio shop will do your radio the right way.

If you run the east cost mostly then.....

If you get out to Hebron OH at I70 EX 126 across the the road from the TA truck stop (stay away from the one at the same EX across from the Pilot ) in the truck parts building. Thornville cb shop has all of the equipment to do the job right as well.

They have both done work for me and i trust them with any of my radios. These are the only techs that i have used in the past that know how to set up a radio for top performance on SSB,and that is no lie!

REMEMBER!!!
When you go into a cb shop and they only have a dosy test meter and a power supply then turn around and walk right back out the door. Look for equipment like signal generators,oscilloscope, dummy loads, multi meters and such,if your not sure then ask them. If they don't have the proper test equipment then you are throwing your money away!

If you ever...ever hear a tech say "oh you don't need all of that stuff to tune a radio" or if they seem to get pissed off if you ask them about what they use or where they learned to work on electronics then walk away!