My company just gave my a new truck that appears to be prewired to install a iradio. I never did bother with one, but went ahead and bought a cobra 29 LX. The problem I have is wiring it in. The colors of the wires coming out of the cb compartment are pale green and white wheras the wires that come with the cb are red and black.
Most of the guides on the internet show you how to wire it directly to the fusebox or the battery, and pertains to pickup trucks for some reason. Does anyone know where I can find a good step by step guide for installing this thing?
Installing CB in new International
Discussion in 'CB Radio Forum' started by scatterling, Jun 23, 2011.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
just call the dealer and ask the service dept what color the hot is...? should be the white one. that goes to the red from the radio. or just get a power tester and check to see which is hot
-
Thank you. Appreciate the help.
Bworley0327 Thanks this. -
btw to check the power you need to have the key ON or you will not have any power at all
Bworley0327 Thanks this. -
Green was hot, white was not. Connect green to red and white to black. Very simple.
Bworley0327 Thanks this. -
So would that be the same for a 2018 LT
Bworley0327 Thanks this. -
Would that be the same for 2018 LT
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.