CB shop in Hebron Ohio???

[philjo]

Anyone ever have any work done by the fella off I-70 next to the pilot in Hebron Ohio? Im through there all the time but never dealt with him or know anyone who has. Hoping hes not one of those so called hacktechians.

[philjo]

Or how about the new guy at the J in Carlisle Pa. Im through there often as well.

[mike5511]

We'll give this a little bump to keep it near the top. rabbiporkchop should know. PM him if he doesn't jump in here.

[Mad Dog 20/20]

Or how about the new guy at the J in Carlisle Pa. Im through there often as well.

I am not sure if this is the same shop but DTB is a very tech.If your looking for A swing mod or some other bull$h*t radio mod, look elsewhere.Dave will not do them and would recommend them to be removed.

DTB Radio
1900 Harrisburg Pike
Carlisle, Pa. 17015



Contact Info:
When contacting DTB Radio, please use email. We provide phone information only as a last resort for contact purposes. Also, if you have questions about a project you are working on or want some kind of technical info, you MUST USE EMAIL. We no longer answer questions of that type over the phone.

Phone: 1-877-909-2348 (toll-free)
Email: Use this address when you email: DTBRADIO@PA.NET


http://www.dtbradio.com/info.html

[philjo]

I appreciate the info. I know the radio will need alignment but beyond that i dont know, i do know i dont want it all hacked up.

[rabbiporkchop]

Or how about the new guy at the J in Carlisle Pa. Im through there often as well.

dtb radio in carlisle. avoid the guy at the j and the one at the petro.
DTB is about 1 mile up from the J on the same road away from the interstate on the right hand side, downstairs from the chrome shop.

[philjo]

10-4, appreciate it.