Sadelta me - 3

Discussion in 'CB Radio Forum' started by dino360, Mar 13, 2014.

  1. dino360

    dino360 Bobtail Member

    38
    0
    Mar 2, 2014
    0
    Does anyone know the wiring for this mic? I have one that was set up for my RCI 2950 but the plug got ripped off. I re connected pins 1-4 (braid, white, brown, Green) and put in a brand new 9v. I can transmit just fine but had no echo and I know it used to work. Not sure if it had anything to do with the fact that I left the red wire from the mic unattached because the other 2 pins (5&6)are the channel buttons. Thanks
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Luwi67

    Luwi67 Heavy Load Member

    714
    449
    Oct 24, 2012
    Long island
    0
    http://www.cbtricks.com/mic_manuals/sadelta/sadelta_echo_master_plus_mic_sch.pdf
     
  4. dino360

    dino360 Bobtail Member

    38
    0
    Mar 2, 2014
    0
    Thanks for the reply but I already had that and didn't understand what the hell I was looking at . I thought it was for an echo master echo box instead of a mic. I'm about as dumb as a rock but I guess my question should have been does anyone know if I need to have the red wire connected and If so,which pin? This thing had the plug ripped off and chewed up so I just soldered back everything where it was but I can't tell where or if the red wire was ever attached.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.