R&r communications???

[geartow]

I agree with sparkys is the place . They are in our work trucks, cobras and they do talk !

[FriedTater]

PM Sent with LIST link,most of which is outdated and proven bogus and biased.

Originally Posted by davedub69

Hey! Thanks for all the feedback! I will give Sparky's a look and see what he has to offer! Carolina Thunder, I do see what you say about they are good to go out of the box. I would like to know what sites have R&R blacklisted? What have they done or not done? Any more info. would be great! Thanks!

[Mr. PlumCrazy]

The only shop i use is Communications Center exit 106 I85 Trinity, NC only problem is no truck parking even though you can get in there with a truck and I have seen some come in there is not a lot of room and you will have to leave you radio because he will not stop working on something to get to yours but its worth it if you live near by The owner has been in the business as long as I can remember and knows what he is doing. There is a sticker inside the case of my radio with dates he serviced it and everything he done and all the settings. My advise is find a good radio shop that will take their time and do it right even if it means leaving it a couple days (every driver should have a backup radio) leave the wack pack and super tunes alone unless you want to shorten the life of you radio and spend a lot of money for a over modulated radio
[LINK POSTED BY MEMBER] Only Members Can View This Truck Forum Link.

[WA4GCH]

Originally Posted by kd5drx

I've said it over and over again on here. If the tech doesn't have a RF station monitor scope that usually cost more than most of them have ever seen and can show you a class 1 radio tech license run don't walk away from him. He is a butcher and not a tech. He read a book that is published all over the place so and so's tricks and tips to tune a CB radio and now he is a tech. If he can tell you what it is that he is cutting out or twisting on inside your radio again run away, more radios are destroyed by idiots that bye a 2.00 book and go to cliping and twisting then any thing else.

Class 1 license ? You meen a FCC First class now known as a General radiotelephone license ( NOT A GENERAL CLASS HAM LICENSE ) .....
I got my first class in 1967 and when it was renewed for the last time they changed all of then to one of these ......

One gripe I have is there are no rules to call your self a TECH and work on CB or HAM radios.