truckerdave1970, Not at all, you posted the problem, I took a guess at what might be wrong. Now for your company, Stop that truck, park it, call them, tell them this thing aint moving till the problem is fixed. I have done that before, They sent a truck out to fix the problem. Now your company, dont know how they will react to that, but with CSA 2010, It will go against you if you are in a Scale house, getting DOT.
truck pulls hard right when i apply the brakes???
Discussion in 'Experienced Truckers' Advice' started by truckerdave1970, Feb 27, 2011.
Page 3 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
make sure your front axle cap--rubber plug isnt plugged--just a paper clip works for that--allows air to escape so no pressurization
crawl under truck and have a ppek at front shoes--hopefully no dust cover-might be able to see some oil and muck on the top of the bottom shoe--if you can get an led small flexy light--it works best--try and peer at the seal area of the front axle--it can be donelook at bottom of seal for leakage----
if that lloks good try and reset your slack adjuster then get somebody to apply brakes while you watch and listen for air leaks or anything out of the normaltruckerdave1970 and Wargames Thank this. -
Back both front adjusters off and see it it goes away.
This way you will know if it is on the front or not.
It is possible that it is loose u bolts but you can usually hear that. -
-
I don’t know how long ago this was but I’m having ssme issue with my pi’s freightliner schoolbus. Pulls extreme hard to right whe I apply brake. Did you solve your issue? Just wondering looking for clues since I have spent so much money trying to figure this out -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3