Trucking Jobs New Driver Jobs Flatbed Jobs Tanker Jobs Refrigerated Jobs Auto Hauler Jobs
Results 1 to 8 of 8
  1. #1
    Light Load Member
    Member Since
    Oct 2012
    Trucker?
    0-1 Year
    Posts
    90
    Thanks
    0
    Thanked: 10 Times

    Help with 2 active faults pls

    Hi i have 2 active faults on my truck its a 2002 century with det 60 10 spd. The first fault is eng low 128s214 01 I looked it up they say its a ecu problem and the only way to fix it is to replace the whole ecu is it true?? And my second fault is brake wh snsr axl 2r open 136s004 05. I want to know what is this problem and how to fix it if anyone can help Ty.


  2. #2
    Road Train Member Pablo-UA's Avatar
    Member Since
    Oct 2010
    Location
    Borispol, Ukraine
    Trucker?
    Trucking Industry
    Posts
    6,585
    Thanks
    24
    Thanked: 1,151 Times
    real time clock is powered with small 3.6 v battery. It is Li battery used for ECM life. In electronic shops it is possible to solder new battery in and with DDRS you can set the clock

    SID 004 FMI 5 - broken ABS sensor wire, right rear wheel (you have Wabco ABS-E 4S4M system)

  3. #3
    Light Load Member
    Member Since
    Oct 2012
    Trucker?
    0-1 Year
    Posts
    90
    Thanks
    0
    Thanked: 10 Times
    Ty for response yea I found the problem for the wire In rear axle it's cut inside the drum somewhere I'm gonna fix it when I change the rear tires I can't get to it without removing the wheels but for the other fault I think I'm gonna leave it alone cause I heard it doesn't cause any problems for the truck. Does anyone know how to erase fault codes?

  4. #4
    Road Train Member Pablo-UA's Avatar
    Member Since
    Oct 2010
    Location
    Borispol, Ukraine
    Trucker?
    Trucking Industry
    Posts
    6,585
    Thanks
    24
    Thanked: 1,151 Times
    freightliner dashboard reads codes as active, so fix cut wire with heat shrink and ABS code dissapeares

    Engine ECM code may be fixed in electronic shop. If you ignore bad clock battery it may leak acid and damage ecm iside. To desolder battery find shop with infrared solder station and ECM body heater, becouse if to heat battery only if may blow spiling acid on film and ECM be damaged out of repare

  5. #5
    Light Load Member
    Member Since
    Oct 2012
    Trucker?
    0-1 Year
    Posts
    90
    Thanks
    0
    Thanked: 10 Times
    the wire is cut deep inside the drum i think i gotta wait till i remove the tires to get to it i hope i can just put them back together

  6. #6
    Road Train Member Pablo-UA's Avatar
    Member Since
    Oct 2010
    Location
    Borispol, Ukraine
    Trucker?
    Trucking Industry
    Posts
    6,585
    Thanks
    24
    Thanked: 1,151 Times
    Quote Originally Posted by ptwn1 View Post
    the wire is cut deep inside the drum i think i gotta wait till i remove the tires to get to it i hope i can just put them back together
    Replace ABS sensor.

  7. #7
    Bobtail Member
    Member Since
    Sep 2012
    Trucker?
    30 Years
    Posts
    7
    Thanks
    0
    Thanked: 2 Times
    Yes by all means replace the Abs sensor. Do not splice it back togeather! The Abs light will still remain on until you clear the active fault and then drive the truck a short distance. Make sure you check the air gap between the sensor and the exciter ring before you put the brake drum back on.

  8. #8
    Road Train Member Pablo-UA's Avatar
    Member Since
    Oct 2010
    Location
    Borispol, Ukraine
    Trucker?
    Trucking Industry
    Posts
    6,585
    Thanks
    24
    Thanked: 1,151 Times
    push the sensor back with ring carefully to get minimal air gap but do it carefully to avoid ring be bent

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •