hood/front end questions for 94' fld 120

Not alot of people would know. Start a google search. Get dimmensions of your current hood and compare them to the one you want. Might take a little time. Try typing this into google "dimensions of (hood on truck model and make).

Goodluck

 

it depends on what fld120 you have. they did make a set forward axle that you could get a short nose classic hood. Otherwise you have to change the frong springs, move the axle forward and get the hood. personal I hate the short nose classic as the fenders sit way up high not like your more commonly seen classic xl which is a 132

But if you want to make it look good get a new hood, get a drop down chrome wrap around bumper 22in drop get the stainless hood wraps like classics have and the chrome for the headlight area. a drop visor with lots of lights move the stacks to the cab sides and get the light bars there. lights up the back fairings and bunk area. lights under the bunk area shining on the tanks.lighted mud flap hangers....does your truck have skirting or open tanks. if its skirting mount 2 in seal beams down on the lower part at the seam.....I can go on more....lol

 

you can use the classic hood if you have the front springs and frame extenders would take alittle time but can be done

 

You can mount a F/L Cabover cab on an FLD chassis by changing the front frame extenders/ spring hangers so I'm sure a Classic hood will fit as well. The bolt pattern should be the same. Since both are 120" BBC, the cab should be in the right spot in the frame.

But not all Classics are the same. They were changed around 2002 and made to mount on a Century chassis. If the Classic bumper has 2 sort of square holes for tow hooks it's the new style if it has the horizontal oval in the center with a tow pin it's on an FLD chassis.

 

Hey the big ugly,
How did it go? What did you do? I am looking at doing the same thing.

 

That post was in 2013. The poster left 2 days later. You won’t get an answer.

 

Rumor is that he was committed to a mental institution..& he proved that you can put a square peg in a round hole ..
They also claim he holds the championship trophy at the institution for the jug saw puzzel completion..

 

Lol!!