95 Freightliner FLD120 Cummins M11 Turn Signal Issues

Discussion in 'Freightliner Forum' started by Nole922, May 3, 2013.

  1. Nole922

    Nole922 Bobtail Member

    9
    0
    Nov 29, 2012
    0
    Hi, my turn signals and hazards quit working from one minute to the next...I replaced the steering column turn signal switch and still nothing...I noticed when I apply turn signal switch lever I hear relay switch engaging in and out but no lights work...I replaced flasher relay and still nothing...now the other day I noticed the turn signal lights worked for about 3 seconds and stopped and kept hearing relay engaging in and out...anyone might know what this issue could be?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. jameslawton

    jameslawton Light Load Member

    257
    65
    May 1, 2013
    Tulsa OK
    0
    if they light up in the dash then i would say to check the connection at the fire wall may be a little loose if all of the turn signals dont work also take the flasher and relay out check the plugs at the flasher see if they are loose on the pin
     
  4. donkeyshow72

    donkeyshow72 Light Load Member

    181
    76
    Oct 25, 2011
    Omaha, NE
    0
    I had a similar problem and ended up replacing 4 relays, the cost I think was $45
     
  5. Nole922

    Nole922 Bobtail Member

    9
    0
    Nov 29, 2012
    0
    Yea I tested all the relays and they checked out fine...from the previous posts I've read it's leading me to believe it might be a bad breaker or the light bar but leaning towards a bad breaker...sure is driving me insane...thanks for the help though.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.