Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

2007 Freightliner (Columbia) M/B wont turn over

Discussion in 'Freightliner Forum' started by Orondo, Apr 9, 2014.

  1. Apr 9, 2014 #1
    Orondo

    Orondo Bobtail Member

    2
    0
    Apr 9, 2014
    0
    2007 Freightliner (Columbia) M/B 10 speed auto shift , I parked it in my shop for the winter, there’s 16,000 on the rig. It WON’T START or turn over, THE BATTERYS ARE GOOD.
    Left it in “R” I unplugged the batt and rocked the truck, still won’t turn over. The gear select indicator light on the dash lights up w/ a square then goes to 2- dashes when the keys turned on


     
    Orondo, Apr 9, 2014
    Orondo, Apr 9, 2014
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 9, 2014 #2
    RSQ20

    RSQ20 Medium Load Member

    315
    92
    Jul 11, 2013
    Upper Fraser Valley, BC Canada
    0
    The "--" is an indicator that the transmission is not in "N", the system will not come on line unless "N" is displayed..

    It is imperative that you check for BAT power at terminals A-B on TCM... You must have a solid + (Battery) and a solid - (ground)
     
    RSQ20, Apr 9, 2014
    RSQ20, Apr 9, 2014
    #2
    mgrantes Thanks this.
  4. Apr 9, 2014 #3
    Exiled

    Exiled Light Load Member

    181
    29
    Apr 20, 2013
    0
    it is common with EU trucks to just disconnect the battery and wait for a few minutes and connect it again to reset the ecu
     
    Exiled, Apr 9, 2014
    Exiled, Apr 9, 2014
    #3
  5. Apr 9, 2014 #4
    Orondo

    Orondo Bobtail Member

    2
    0
    Apr 9, 2014
    0
    TCM is on top of trans, right ?
     
    Orondo, Apr 9, 2014
    Orondo, Apr 9, 2014
    #4
  7. Apr 9, 2014 #5
    RSQ20

    RSQ20 Medium Load Member

    315
    92
    Jul 11, 2013
    Upper Fraser Valley, BC Canada
    0
    Should be bolted (3) to driver side, access panel in floor between seats...

    The X-Y shifter is on top....

    Philip
     
    RSQ20, Apr 9, 2014
    RSQ20, Apr 9, 2014
    #5
  8. Oct 4, 2015 #6
    Jerry12

    Jerry12 Heavy Load Member

    723
    282
    Sep 9, 2014
    0
    Dated Post: Use a pair of metal plyers and jump the truck @ starter/solenoid
     
    Jerry12, Oct 4, 2015
    Jerry12, Oct 4, 2015
    #6
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.