When I turned low beam lights on while driving on highway..All the dash lights and utility lights cut off but when I turned high beam on, all the lights come on as normal even if I don't turned headlights on, light and utility lights work.
It just that every time when I cruised at night w low beam, all the lights on dash and trailer lights cut off.
Anyone knows what's the problem? If I'm at stop light or go less than 10mph, it works fine w low beam lights
Need help w 07 century on lights
Discussion in 'Freightliner Forum' started by nsxftw, Aug 25, 2014.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Start by inspecting the wiring from head lamp to the chassis. You need to take zip ties and protector off in order to do so, make sure you replace them after inspection. I've seen problems on this part of my loom due to vibration, it tends to wear jackets off and cause wires to short out.
nsxftw Thanks this. -
Get someone to sit in the drivers seat at night then wiggle the wires and see if you can narrow down where the short is.
-
-
Right on man!! I'm glad to be of any help. GL!
nsxftw Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.