FLD 120. 1999 3406E Cat. Rockwell Cruise buttons on the shifter.
I lost my cruise awhile back. I just was reading on here about the Johnny bar and how it could kick it off.
Playing with the bar the cruise/high idle works when i apply johnny but when i release it the idle and cruise kicks off.
johnny brake applied = cruise works. release it and it stops working
Discussion in 'Freightliner Forum' started by Catliner, Oct 11, 2014.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Change the micro switch on the johnny brake handle.
-
I can press the brake pedal and it will work too
-
Just has 3 air lines
-
I found an air pressure switch. When unhooked it doesnt do anything. When hooked up and brakes applied it allows the cruise to work. When I pull a lead off the.cruise cuts out. But its not the brake light switch because I replaced that a month ago.
-
CK. for the 2 air powered switches screwed into air brake lines behind dash panel, some are off/on others are on/off someone put wrong switch in. keeps cruse off when brakes are in use?
Catliner Thanks this. -
-
Yeah I guess so. Ill put in a NC switch so when I hit the brake the cruise kicks off. Now that I think about it this started after I replaced the low air (normally closed) switches. Thanks for the help guys. Ill post a reply if changing the switch monday fixes it. I have no idea how this happened. When I replaced the other switches on the manifold it was wired right
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.