Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

1997 Freightliner FLD120 Detroit Series 60 - Rapid Clicking, No start

Discussion in 'Freightliner Forum' started by 97fld, Jan 28, 2015.

Page 1 of 2
  1. Jan 28, 2015 #1
    97fld

    97fld Bobtail Member

    5
    0
    Jan 28, 2015
    0
    I have a 97 Freightliner FLD120 that chooses not to start whenever it wants. I replaced all 4 batteries, brand new. Replaced the starter/solenoid, brand new. I try starting it and it just makes a rapid clicking sound. Any ideas? Thanks.
     
    97fld, Jan 28, 2015
    97fld, Jan 28, 2015
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jan 28, 2015 #2
    Helowrenchturn2

    Helowrenchturn2 Medium Load Member

    484
    139
    Apr 23, 2013
    0
    Frame grounds?
     
    Helowrenchturn2, Jan 28, 2015
    Helowrenchturn2, Jan 28, 2015
    #2
  4. Jan 28, 2015 #3
    mnmover

    mnmover Road Train Member

    1,237
    1,103
    Apr 5, 2009
    Lichfield MN
    0
    On the firewall there is a relay located near the top on the left side. Try jumping the terminals together with a small screwdriver. Make sure the truck is in neutral and the brakes are locked first. I think you will find out the relay is making the clicking noise, perhaps it needs replacing. If not, check the starter button on the dash, they wear out tooo.
     
    mnmover, Jan 28, 2015
    mnmover, Jan 28, 2015
    #3
    magoo68 Thanks this.
  5. Jan 29, 2015 #4
    97fld

    97fld Bobtail Member

    5
    0
    Jan 28, 2015
    0
    Thanks driver i will give it a try
     
    97fld, Jan 29, 2015
    97fld, Jan 29, 2015
    #4
  7. Jan 29, 2015 #5
    97fld

    97fld Bobtail Member

    5
    0
    Jan 28, 2015
    0
    The clicking seems to be coming from the starter. I tried jumping the two terminals together and it still clicks from the starter
     
    97fld, Jan 29, 2015
    97fld, Jan 29, 2015
    #5
  8. Jan 29, 2015 #6
    97fld

    97fld Bobtail Member

    5
    0
    Jan 28, 2015
    0
    checked all the grounds there good
     
    97fld, Jan 29, 2015
    97fld, Jan 29, 2015
    #6
  9. Jan 29, 2015 #7
    JMcCuller

    JMcCuller Bobtail Member

    9
    0
    Jan 29, 2015
    0
    Replace the fuses or relays for the ignition or starter maybe, always start with the simple things. Wont hurt to have spare fuses and relays laying around if it doesnt fix it.
     
    JMcCuller, Jan 29, 2015
    JMcCuller, Jan 29, 2015
    #7
  10. Jan 31, 2015 #8
    062

    062 Road Train Member

    5,849
    31,702
    Oct 20, 2013
    0
    When it does this will it start fine if you jump it with another truck? Are your grounds all factory? I have a 2000 fld,on mine the factory ground stud is pressed in. Had to cut off and punch out for a good ground
     
    062, Jan 31, 2015
    062, Jan 31, 2015
    #8
  11. Feb 2, 2015 #9
    RSQ20

    RSQ20 Medium Load Member

    315
    92
    Jul 11, 2013
    Upper Fraser Valley, BC Canada
    0
    Clicking relays/starter/solenoid is a indication that there is not enough current (amps) reaching the device..

    Bad grounds, bad cables, bad/corroded connections, bad battery, bad starter (too high a draw), ... all need to be verified and load tested.. Short cuts will not work....

    ... Philip
     
    RSQ20, Feb 2, 2015
    RSQ20, Feb 2, 2015
    #9
  12. Feb 3, 2015 #10
    97fld

    97fld Bobtail Member

    5
    0
    Jan 28, 2015
    0
    Had a loose ground on the block... Resolved now, thanks for all your help.
     
    97fld, Feb 3, 2015
    97fld, Feb 3, 2015
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 2