Going up 6% grades is not too fun when you're stuck at 1500. Anybody know how to change the parameters?
2015 Cascadia Evolution; RPM parameter won't go over 1500, how do I change it?
Discussion in 'Freightliner Forum' started by AnastasiaBeaverhausen, Jan 28, 2015.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Is it yours or a company truck ?
-
Company truck the mechanics said they didn't know how to do it.
-
Apparently they aren't mechanics. They are set or reset buy computer.
-
That's what I thought. $@#%&₩ can't stand the garage guys!
-
Dd15 doesn't pull well over 1500 rpm during break in period engine cuts back boost ... That engine pulls well down to 1000 rpm BUT is sluggish during break in period and so quiet it doesn't sound like its pulling but it is ... A lot of new engines are set up with a break in schedule programmed into ecm and won't pull hard till x amount of miles go by
AnastasiaBeaverhausen Thanks this. -
He needs a boost of 200rpm to be able to upshift without it getting sluggish... as soon as he does, it drops from 1500 to 1000 before he can get into the next highest gear.
-
Tell them to go to parameters, then change the progressive shift to a higher rpm
-
I'll let ya know what they say, I'll ask them how long the break-in period is as well. Thank You
-
DiagnosticLink 8.01 need to change the parameters of this truck. Any Detroit Diesel dealer can do it for one hour labor charge if you are the registrated owner.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2