shackles ?

Discussion in 'Heavy Haul Trucking Forum' started by 281ric, Sep 16, 2014.

  1. 281ric

    281ric Road Train Member

    1,248
    809
    Oct 20, 2011
    TX
    0
    what size are y'all carrying ? Im pulling a 35 ton rgn and really don't want to over or under buy and carry around more than I need.
    Thx.
     
    skootertrashr6 Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Pipe 40

    Pipe 40 Light Load Member

    209
    359
    Mar 24, 2012
    Toowoomba Queensland
    0
    I'd suggest you get ones that are rated the same as or just a little higher then your weakest link because any bigger would be a waste. And another set smaller just in case holes are smaller. Usually D shackles have a wider opening then bow shackles which can be an advantage.
     
    skootertrashr6 and 281ric Thank this.
  4. HighCountry

    HighCountry Light Load Member

    172
    301
    Feb 27, 2014
    Stephenville, Texas
    0
    Hey 281, nothing wrong with over kill in this biz.
    You'll get the most use out of the 15k WLL shackles. They seem to be deep enough to fit most tie down holes,
    But every once and awhile you'll get those deep set holes with the 2" thick metal and the 20k shackles are the only thing that'll fit. I have 4 of them and smile every time I have to pull'em out.
    Sure beats pulling the kotter pins, running chain thru re-pinning, than again at the other end.
    That's just to much extra work for me.
     
    MartinFromBC and 281ric Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.