09 prostar a/c replaced everything still not working

Discussion in 'International Forum' started by radicastuff, Aug 7, 2012.

  1. Cap Caveman

    Cap Caveman Bobtail Member

    3
    0
    Mar 17, 2015
    0
    If it won't ome out at 300 Mila amps it's no good
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Cap Caveman

    Cap Caveman Bobtail Member

    3
    0
    Mar 17, 2015
    0
    The ac in the pro star and the warn engine light tells all dealers one thing money maker as soon as I get home to do taxes first part of April I will post a list of part numbers frome 3 places to make thermistors up grade yourself for about $60 to do them both with new contacts and silacon shrink tube
     
  4. Nervus Wreck

    Nervus Wreck Bobtail Member

    3
    0
    Apr 11, 2015
    0
    I have a 09 postwar and the cab a/c has stopped blowing but the bunk still bows and blows cold. With the a/c set to fresh air I get some cold air while driving. Also the power to the fm radio went dead at the same time. I believe they are caused by the same problem. I have checked every breaker and even switched some around with one's I know were good and checked all the fuses. I pulled the a.c. controls switch and with a test light couldn't find any that tested hot but since international were kind enough to make all the wires green and I can't find a schematic I have no idea which one should be hot. Any help would be appreciated.
     
  5. Heavyd

    Heavyd Road Train Member

    7,625
    6,023
    Feb 4, 2009
    0
    Check the 30 amp breaker right in the very front row in the center of the of breaker panel. That actual breaker is hit all the time by the panel cover. The breaker and/or the terminals it plugs into can get damaged and can cause no fan.
     
    Nervus Wreck Thanks this.
  6. Nervus Wreck

    Nervus Wreck Bobtail Member

    3
    0
    Apr 11, 2015
    0
    Thanks Heavyd but that didn't help. Do you have any more tricks ?
     
  7. Heavyd

    Heavyd Road Train Member

    7,625
    6,023
    Feb 4, 2009
    0
    Nothing quick and easy unfortunately.
     
  8. My11Inter

    My11Inter Bobtail Member

    41
    3
    May 19, 2015
    0
    Hello, new to the forum. Have a '11 prostar isx and air blows through the vents on the road even if it's on max ac setting which should close the flapper door on the cowl. The door only closes when you turn the blower fan on in max ac. What could it be?
     
  9. texasmorrell

    texasmorrell Medium Load Member

    597
    624
    May 3, 2012
    Lone Star State
    0
    You could have a bad blend door motor but more likley you are feeling air being pushed by the fan. On the Prostar if the fan is on in the sleeper, even the lowest setting, the AC will stay on in the whole truck. Even if you have the AC turned off on the HVAC selector switch on the dash. If the AC is on then the body controller keeps the fans blowing to prevent the evaporators from freezing up. So first turn off the sleeper fan completley then turn off the AC then shut off the cab fan. That is how you must do it.
     
  10. My11Inter

    My11Inter Bobtail Member

    41
    3
    May 19, 2015
    0
    I've done all of that and nothing. It's fresh air from the outside when the truck is running. It's like when you turn off your recirc/fresh button on a small car and let's fresh air come from outside through the vents. The weird part is when I turn on the blower fan on Max ac setting, the fresh air door on the cowl closes. If I put it on regular ac setting, the door opens. I also replaced the blend motor and nothing.
     
  11. Heavyd

    Heavyd Road Train Member

    7,625
    6,023
    Feb 4, 2009
    0
    That is how it is. The fresh air door is only closed on "MAX" a/c. Normal for it to be open any other time.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.