so guys I know this is not an 18 wheeler but still a diesel truck and I hope someone can help me with this problem
I bought a 95 international 4700 with the t444e engine and 5 speed trans.,
I drove the truck home 150 miles with no significant issues
parked it and started it up the next day without any issues.
I pulled the truck into our shop and did suspension work, new clutch, new rear main, front main, and oil pan seal,
got it all back together and now it wont start, it wont even crank.
I have power going to the yellow starter relay, and power coming back out of it with key to start. but still no crank.
I can jump the starter and it will crank but wont fire, it will start off ether but shuts right down after,
if anyone can help it will be highly appreciated
95 international no crank
Discussion in 'International Forum' started by affordabletowing413, Aug 10, 2014.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
CK. starter sol. for small pos.wire that was not hooked up that powers up the Ing,ck. inside the batt. box to see if the power and ground wires are hooked up to inline fuse that leads to ECM. another fuse is in fuse box.
-
Check all your fuses, check the relays on the firewall over the engine and double check all your battery and starter connections. If there are any fuses in the battery box, check those too. Something may have popped during the repairs or got disconnected be accident.
-
You had the trans out to do the main.
Maybe it has a sensor on the transmission that shows it's in neutral or something like that. -
check two relays on firewall.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.