I have a 2013 Prostar, I just swapped out the OEM lower bumber and installed a Magnum moose bumper. The new bumber dosent have fog lights in it and the old lower one did so i bought a pair of nice driving lights but when i am trying to wire them there is no power going to the plugs that are there from the factory. i turn the switch on the dash and it dosent illuminate so im guessing somewhere there is a breaker/fuse that is tripped/blown. where is the first place i need to look for this?
Fog/Driving light problem
Discussion in 'International Forum' started by Bigdawg69, Sep 22, 2014.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You do know that the fog lights turn off when your high beams are on right? Also, you have to have your regular headlights on too.
-
Why do some drivers drive with the fog lights on,on a clear night ?
Snailexpress Thanks this. -
2013Maxx Thanks this.
-
-
Key on and headlights on/low beam for fog lights to work.
-
got it fixed. moose bumpers dont have fog lights but we use the fog light switch to wire high powered lights to run at night to spot swamp donkeys here.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.