I was wondering if it is reasonable to obtain a wiring harness for a 95 w900l the one that comes out of the ecm and goes to the tractor. last 6 of vin are 646721 thanks
KW wiring harness
Discussion in 'Kenworth Forum' started by MichaelP, Nov 10, 2011.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I'm sure you can go to kw and buy one. But you better be sittin down when they tell you the price.
-
Oh yes definitly harnesses from the dealer are expensive.. My taillight harness was all butchered up and constantly giving me problems where the previous owner had put a custom chrome tailight hanger off the bottom of the frame rails and did a hack job wiring it up. I checked and they wanted $170.00 for the harness from where it plugged into the main harness back to the tailights. All I really needed was that female part of the connection with some wires coming out of it. So I decided to cut all the mess off the original and re-use it. Did a very clean wire job on that one very proud of that sealed up as good as the factory. No tester or anything. Actually traced where all the wires went and what they did then drew a diagram to make the new harness.. Doubtful you would want to try this with an ecm harness though. KW Parts guy can probably give you the actual part # you need. Then you can call your local KW and get a price..
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.