Mirror Vibration

Discussion in 'Kenworth Forum' started by ABadAzzPete, Mar 16, 2014.

  1. ABadAzzPete

    ABadAzzPete Bobtail Member

    I had to jump in an 06 T800 and back a couple trailers into the dock the other day. At certain points I couldn't hardly see anything in the mirrors because they were vibrating so bad. Been so long since I've sit in a KW I forgot about this issue.... Anyway to get to my point, is there any way to solve this, besides like slipping the clutch, and revving it up a few rpms?? Is something loose or what the heck??
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Dirty-Low-Walker

    Dirty-Low-Walker Medium Load Member

    359
    543
    Dec 17, 2013
    0
    I purchased a w900 just over a year ago and have this issue, just an extra 50 rpm's takes care of it and it stops, next time my ecm is looked at i am going to ask them to boost the idle up.
     
    ABadAzzPete Thanks this.
  4. olphart

    olphart Medium Load Member

    301
    146
    Feb 15, 2009
    Minden,LA
    0
    You might have already tried this, but on a lot of them you can change the idle speed by turning off the cruise switch then use the set / resume button to change it in 10 rpm increments. It will stay that way till from then on.
     
    Dirty-Low-Walker and ABadAzzPete Thank this.
  5. Ann Eiffel

    Ann Eiffel Light Load Member

    89
    58
    Nov 13, 2013
    0
    I heard ya'll were discussing vibrators in here. I gotta tell ya about...oops, never mind - found my glasses...
     
  6. Dirty-Low-Walker

    Dirty-Low-Walker Medium Load Member

    359
    543
    Dec 17, 2013
    0
    Thanks for the good laugh!
     
    ABadAzzPete Thanks this.
  7. Dirty-Low-Walker

    Dirty-Low-Walker Medium Load Member

    359
    543
    Dec 17, 2013
    0
    Thanks, i didn't know that, i'll try that Monday.
     
  8. Dirty-Low-Walker

    Dirty-Low-Walker Medium Load Member

    359
    543
    Dec 17, 2013
    0
    I have a 99 W900 with a 3406E and that didn't work.
     
  9. ABadAzzPete

    ABadAzzPete Bobtail Member

    yeah that didn't work here either...any other suggestions
     
  10. ABadAzzPete

    ABadAzzPete Bobtail Member

    Ok tried this it don't work on this (POS) truck
     
  11. ABadAzzPete

    ABadAzzPete Bobtail Member

    Really nobody else has ever had this problem?? Every KW I've ever been in has done this......man I don't see how you can put up with this. Major PITA if ya ask me, glad I'm not stuck in one of these trucks daily!!
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.