Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Low coolant sensor

Discussion in 'Kenworth Forum' started by Up74427ca, Apr 12, 2014.

Page 1 of 2
  1. Apr 12, 2014 #1
    Up74427ca

    Up74427ca Light Load Member

    145
    25
    Sep 1, 2012
    Little Saigon,ca
    0
    Hi,Driver,I drain reservoir ,put new sensor in,but the check engine keep buzzing,any help?
     
    Up74427ca, Apr 12, 2014
    Up74427ca, Apr 12, 2014
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 12, 2014 #2
    wonderdog24

    wonderdog24 Medium Load Member

    377
    127
    Mar 1, 2012
    Puyallup,Wa
    0
    You have a short in the wiring.... Peel back the condom covering the wiring n search for the bare spot where they are touching.... What engine do you have???
     
    wonderdog24, Apr 12, 2014
    wonderdog24, Apr 12, 2014
    #2
    Up74427ca Thanks this.
  4. Apr 12, 2014 #3
    Up74427ca

    Up74427ca Light Load Member

    145
    25
    Sep 1, 2012
    Little Saigon,ca
    0
    I have isx cummin,thanks
     
    Up74427ca, Apr 12, 2014
    Up74427ca, Apr 12, 2014
    #3
  5. Apr 12, 2014 #4
    Up74427ca

    Up74427ca Light Load Member

    145
    25
    Sep 1, 2012
    Little Saigon,ca
    0
    Do I need to bring dealer to rest it?
     
    Up74427ca, Apr 12, 2014
    Up74427ca, Apr 12, 2014
    #4
  7. Apr 13, 2014 #5
    wonderdog24

    wonderdog24 Medium Load Member

    377
    127
    Mar 1, 2012
    Puyallup,Wa
    0
    All depends on how you read active codes vs non active codes... I only run Detroit s60... Active goes away once fixed
     
    wonderdog24, Apr 13, 2014
    wonderdog24, Apr 13, 2014
    #5
    Up74427ca Thanks this.
  8. Apr 13, 2014 #6
    bjytech

    bjytech Light Load Member

    197
    178
    Nov 9, 2013
    Ohio
    0
    Once you find and repair the problem the light will go out after running the engine for 30sec. Or so. What are you using to read the codes?
     
    bjytech, Apr 13, 2014
    bjytech, Apr 13, 2014
    #6
    Up74427ca Thanks this.
  9. Apr 13, 2014 #7
    Up74427ca

    Up74427ca Light Load Member

    145
    25
    Sep 1, 2012
    Little Saigon,ca
    0
    I took it ta truckstop at Troy,Il,they put in my ,they deleted but 3 second later,it pop up again,they told me to bring to kw dealer,my default code said low coolant,but I changed it,but it buzzing,it drive me nut,I thinked when I get home ,I will bring it in kw dealer ,but I trace wire,no damage....
     
    Up74427ca, Apr 13, 2014
    Up74427ca, Apr 13, 2014
    #7
  10. Apr 14, 2014 #8
    WitchingHour

    WitchingHour Road Train Member

    3,422
    2,142
    Apr 1, 2011
    Broomfield, CO
    0
    Wiring issue. They've had a fair number of those with the wiring harnesses they use.
     
    WitchingHour, Apr 14, 2014
    WitchingHour, Apr 14, 2014
    #8
    Up74427ca Thanks this.
  11. Apr 14, 2014 #9
    Up74427ca

    Up74427ca Light Load Member

    145
    25
    Sep 1, 2012
    Little Saigon,ca
    0
    Thank you,Witchinghour,hands down to Witchinghour...
     
    Up74427ca, Apr 14, 2014
    Up74427ca, Apr 14, 2014
    #9
  12. Apr 15, 2014 #10
    Myoneload

    Myoneload Light Load Member

    218
    45
    Jan 22, 2013
    around here
    0
    Just put the coolant about a half inch above the hot line and it will quit..
     
    Myoneload, Apr 15, 2014
    Myoneload, Apr 15, 2014
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 2