I have a company '11 660 with 300k that I've driven for a month and a week. It has the factory Kenworth Sirius/CD/AM/FM w/ USB and audio jacks.
I cannot figure out how to get the radio to play thru the bunk speakers. I have tried the fade and balance, but that only changes the sound coming from the cab speakers. I have searched thru the radio menu without luck. And I have searched the whole truck for some external radio controls.
I keep forgetting to ask the mechs when I'm thru the yard. Thanks for any advice?
bunk speakers don't work
Discussion in 'Kenworth Forum' started by KF7WTV, Apr 13, 2014.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
There,s component to turn switch volume ,for the speaker to work in back.
-
Is that component on/in the radio receiver, or elsewhere?
-
Here is pix..driver
-
Figures. I don't have that knob. That is where my bunk fan switch is located. I guess my rear speakers are decoration/not hooked up. Thank you anyways!
-
If the truck was used for team driving, people would unhook the speakers in the bunk. This is so the driver could listen to the radio and no bother the co/driver who is using the bunk. Pop off the speaker grills and see if the wire is unhooked from the speaker.
-
This is a flat-top/solo truck. But I will pop the grills and check the wiring, anyway. thanks
-
U GET SPEAKERS IN SLEEPER TO WORK -
Check the head unit settings, there is a setting for 2ch/4ch.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2