Fuse panel should be right behind the clutch pedal, which I'm guessing is the one you are talking about in your first post. but it should have a few rows of fuses in it, or its also possible the fuses were replaced with breakers instead.
96 kw w900l fuse/electrical help.,bunk lighter plugs
Discussion in 'Kenworth Forum' started by sparky88, Nov 15, 2014.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
All the wires go into a harness. Haven't had the time to really dig into it
-
Yeah that the one i was talking about. I used a multimeter to check them to make sure they completed a circuit. All did that i checked except 1 in a spare slot.
-
If it has a breaker for the cig plugs in the sleeper you may have a short in the wiring somewhere. Do any of the breakers click when you plug them in?
-
Not that i noticed. I will check tomorrow. I'm gonna check the wiring tomorrow at the cigarette plug tomorrow. Just in case they are shot and i can check the ground also
-
which fuses are they
-
i think if you take that panel off there is a fuse back there
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2