I have a t680 Lease through Swift. I was wondering where I can take the truck to have the engine power raised. I don't really care about the speed limiter, but I know this thing can run more horses than it's doing. I already put the 13sp in and that helps with some hills, but where do you recommend out of the swift network to have such work done?
-
New Lease Purchase Jobs $0 Down and other incentives Click Here to see offersDismiss Notice
Engine Modifications
Discussion in 'Lease Purchase Trucking Forum' started by scottmcc13, Mar 9, 2015.
Page 1 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
-
Take it to an engine shop for the type of engine it has in it, such as Detroit or Cummins and have them upload the software for the higher horsepower rating. It costs a few hundred dollars but it's worth it if the power is turned down. Just make sure it doesn't breach your contract with Swift before you do it.
-
Do you own this truck? If not I would wait in till you own it.
-
-
Check your lease probably has a section about modification of any part of the truck.Usually if caught they will cancel your lease as its not really your truck and could void any warranty
-
It will cause more soot build up due to more fuel burning . Cause more freq regens . really not worth it .
-
it takes a while to find sweet spot when driving alot of variables wgt etc. My friend drives a t680 10 sp with 3.25 geared rearend avg 8.3 + he keeps it between green shift point on the tach. with 200gal tanks he get awesome miles almost 1600 mi
-
Some times its better to carry more speed in the bottom of hill, so you get a better start at the next one.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3