Trucking Jobs New Driver Jobs Flatbed Jobs Tanker Jobs Refrigerated Jobs Auto Hauler Jobs Local / LTL Jobs
Page 114 of 115 FirstFirst ... 1464104112113114115 LastLast
Results 1,131 to 1,140 of 1142
  1. #1131
    Road Train Member hindsy's Avatar
    Member Since
    Mar 2010
    Location
    USA
    Trucker?
    2 Years
    Posts
    1,349
    Thanks
    169
    Thanked: 309 Times
    As an inexperienced driver going in roehl is a good place to start. Not sure I would like it much as a more exp set in my ways driver tho. Lots of hand holding and big brother stuff.

  2. #1132
    Road Train Member
    Member Since
    Jan 2011
    Trucker?
    Trucking Industry
    Posts
    4,057
    Thanks
    1,405
    Thanked: 1,942 Times
    Quote Originally Posted by hindsy View Post
    As an inexperienced driver going in roehl is a good place to start. Not sure I would like it much as a more exp set in my ways driver tho. Lots of hand holding and big brother stuff.

    I'd agree with this, if you are lucky enought to get one dispatcher and keep them it's much easier, as you develop that relationship you'll get more lattitude. However, it's much more likely that you'll end up with 4 dispatchers in 5 years.

  3. The Following User Says Thank You to Meltom For This Useful Post:


  4. #1133
    Road Train Member hindsy's Avatar
    Member Since
    Mar 2010
    Location
    USA
    Trucker?
    2 Years
    Posts
    1,349
    Thanks
    169
    Thanked: 309 Times
    Quote Originally Posted by Meltom View Post
    I'd agree with this, if you are lucky enought to get one dispatcher and keep them it's much easier, as you develop that relationship you'll get more lattitude. However, it's much more likely that you'll end up with 4 dispatchers in 5 years.
    I started with none, well, I had the evo bill. Then when I hit flatbed time I had no one. I had a group of different ones. When I went to van had finally gotten an actual FM. Joe was good and we worked well together. So they took him away and I ended up with a girl in Gary. We didn't mesh well at first, but were pretty good after toward the end.

  5. #1134
    Road Train Member
    Member Since
    Jan 2011
    Trucker?
    Trucking Industry
    Posts
    4,057
    Thanks
    1,405
    Thanked: 1,942 Times
    Quote Originally Posted by hindsy View Post
    I started with none, well, I had the evo bill. Then when I hit flatbed time I had no one. I had a group of different ones. When I went to van had finally gotten an actual FM. Joe was good and we worked well together. So they took him away and I ended up with a girl in Gary. We didn't mesh well at first, but were pretty good after toward the end.
    You probably had me for a flatbed dispatcher, it would have been like having nobody.

  6. #1135
    Road Train Member hindsy's Avatar
    Member Since
    Mar 2010
    Location
    USA
    Trucker?
    2 Years
    Posts
    1,349
    Thanks
    169
    Thanked: 309 Times
    Quote Originally Posted by Meltom View Post
    You probably had me for a flatbed dispatcher, it would have been like having nobody.
    I was under the guy that was the lead FM. But he was off almost the whole time. Then I chose to go to bumping docks.

  7. #1136
    Bobtail Member polvann's Avatar
    Member Since
    Apr 2011
    Location
    Richmond,Va
    Trucker?
    5 Years
    Posts
    45
    Thanks
    0
    Thanked: 8 Times
    Roehl still the best..they scratched my back plenty of time..

  8. #1137
    Bobtail Member
    Member Since
    Apr 2012
    Trucker?
    Student
    Posts
    1
    Thanks
    0
    Thanked: 0 Times
    Quote Originally Posted by Cocky View Post
    Hey whispers I am in truck 3744. I'll be sure to keep an eye out for you guys!


    And snake, you can feel free to copy this post over there if you wish.

    As far as me leaving TMC: Well I honestly hesitate to post this, but I guess it has to be said sometime or another. TMC is probably a great company for a lot of drivers. Flatbedding aside, they have excellent equipment and great pay to compliment that

    However the expectations that they put on their drivers is far beyond what is humanly and legally possible. Day one in the orientation, and I wsa told that my goal should be to complete five loads a week. Sounds simple, right? It sure did to me.

    Once I got to my trainer, I was told on the first day with him that in order to succeed in this business, I would have to learn how to cheat my logs. Now I did not know any better, so I bit and played along with it. I figured this guy knew a hell of a lot more than me and he was only introducing me to the real world.

    As a result of this practice, I found myself waking up at roughly 6AM and driving and dealing with the load all the way up until 2AM. This would go on everyday. Needless to say I was tired pretty quickly, and it eventually caught up with me.

    The first time it nearly bit me hard was when I was on a scale in Missouri. My trainer was sound asleep in the back, and to make a long story short, I screwed up thus leading the scale operator to think that something was fishy with me. He had me pull over and bring in my logs and all of the other paperwork.

    In my hurry to "fix" my logs, I cut myself one hour short on my break, and was facing an out of service charge. Luckily the DOT man had not seen my trainer's logs yet, so quickly I went out to the truck, woke my trainer, told him the deal, and we "fixed" his logs so that it looked like I just drew a line in the wrong place. I got lucky, but I never should have been in that position.

    The second time I almost got caught was driving on a backroad in Kentucky. I was dead tired, but still had a long ways to go on my load. Unfortunately I nearly fell asleep at the wheel and merged over into the oncoming lane thus running several other motorists off of the road. Eventually the police caught up with me, and pulled me over.

    I woke my trainer again, and he and I were able to BS our way out of an out of service charge once more.


    Now once i got out on my own, I figured things would get better since I could sleep when I wanted to sleep. Unfortunately doing flatbed work with a very large majority of your loads requiring tarps along with the fleet managers griping about your five loads a week deal eventually puts a toll on your body.

    My week would start on Sunday night every night. I would drive to a customer with the load that was on my trailer from the previous Friday and spend the night there. I would wake up in the morning around 6 or 7am, untarp and unstrap/unchain, and then wait for the forklift guy to unload me.

    Sometime around 10 or 11am, that would be done and I would get my next load assignment. So I would face a bounce of roughly anywhere from 50-150 miles to the next shipper. I could get there anywhere between noon and 2pm. Once there, I have to wait to be loaded, secure and tarp my load. That would put me at 5pm or so and I would face anywhere from 300-500 miles to drive to get to the consignee so that it could be unloaded first thing the next morning.

    Now if you add all of that up, you will find that there is absolutely no way to do all of that and get your required 10 hr break in. I basically was expected to work for 8 hours before driving 8 hours every single night. Hardly any of my loads ever made it on time, and I was under constant pressure from my manager to step up my progress.

    Needless to say, I was ready to quit trucking already. Everyone I talked to at TMC told me that I was doing things the right way, but that it just took time before my body would get used to the rigors of truck driving. I was constantly told that because of these efforts, TMC drivers were making more money than anyone else on the road and that I would be more miserable anywhere else.

    All of that changed when I talked to a friend of mine from driving school. She was a professor at Ohio State University before deciding to try her hand at truck driving. While in driving school, she and I became great friends since I also had a lot of college under my belt and was a tutor in English Composition during my time at the University of South Carolina.

    She wanted to go with TMC, but they refused to hire her due to the fact that she was female. (Yes she got the recruiting department to admit that over the phone.) So she went with Transport America. After sharing some road stories back and forth, we came to the topic of pay and work conditions. I found out that she was making the same amount of money as I was, doing a hell of a lot less work, and was not expected to break the law in order to do that work.

    After giving it some thought, I decided that TMC was not for me. I did not go with Transport America mostly because their hometime for folks in the southeast rather sucks. I chose Roehl, because I really had never heard anything bad about these guys, and to be honest the information I found on them impressed me right off the bat. I never even heard one sales pitch from a recruiter for Roehl. My decision to go with them was based on my own independent research into the company.

    I have only one regret in my decision to go with Roehl, and that is that I wish I had done it sooner.

    Do you haul flatbed with Roehl or Dry Van?

  9. #1138
    Bobtail Member
    Member Since
    Sep 2012
    Trucker?
    8 Years
    Posts
    4
    Thanks
    0
    Thanked: 0 Times
    East Mountain I got a start date and had some questions. Can you email me at coyoteteacher@gmail.com ? I would appreciate any insight on the company and the school. Thanks. Chris

  10. #1139
    Bobtail Member Archer#6's Avatar
    Member Since
    Mar 2013
    Trucker?
    8 Years
    Posts
    38
    Thanks
    10
    Thanked: 5 Times
    does Roehl govern-er their trucks and if so at what speed?

  11. #1140
    Medium Load Member Moriarti's Avatar
    Member Since
    Jan 2007
    Location
    NW Indiana
    Trucker?
    5 Years
    Age
    40
    Posts
    300
    Thanks
    9
    Thanked: 130 Times
    last I heard, it was 61 w/ cruise control, 63 with the pedal mashed.

  12. The Following User Says Thank You to Moriarti For This Useful Post:


Tags for this Thread