Rocker Switch Lights

i havnt worked on pete lights like that--but--i think it was volvo lights i worked on--and i think they want you to replace the whole switch---we did however get the switch apart and manage to replace the bulbs--cause the switchs are expensive little boogers
all i can say is try one--maybe one that isnt critical--pry the sucker open--watch out for flying tiny springs and see if it can be done

 

yes you have to replace the switch, if memory serves me correctly, I dont think there is a serviceable bulb once you get in there. but I've been outta the pete hose since last year and I dont remember for sure.

 

I know the old ones had bulbs you could replace, but I don't know for sure what year they switched to LED's. Just pop off the cover of the switch and see which it has. I will tell you though, the bulbs are a ##### to replace without breaking the bulb. I used a pair of needle nose pliers with some rubber vaccum line on each tip of the pliers. But you still have to be careful, those little suckers are in there tight, lol.

 

I actually got mine at my local Pete dealer, but if you pull one out, someone should be able to match it up.

 

Take bulb to dealer. I have a 2000 and i had like 6 burned out bulbs. I got them for around 3 bucks a piece. Get extra.....

 

They are eaton ngr switches. The whole switch has to be changed. It is much cheaper to buy the switch through eaton or a eaton dealer as opposed to peterbilt. Go to eaton's website and look up their new genereration rocker switch's. If any body wants to replace theirs or maybe add circuits in their trucks, you will see the options available to do so despite what a salesman will tell you!