Trucking Jobs New Driver Jobs Flatbed Jobs Tanker Jobs Refrigerated Jobs Auto Hauler Jobs
Results 1 to 2 of 2
  1. #1
    Heavy Load Member
    Member Since
    Oct 2006
    Location
    Austin, TX
    Trucker?
    5 Years
    Age
    58
    Posts
    998
    Thanks
    74
    Thanked: 321 Times

    387 Pete Doors Sagging

    My doors on my '05 387 Pete are out of adjustment. This is causing wear where the fiberglass is rubbing, excessive wind noise and binding if I let the seat belt get caught between the door and frame. I am wondering if the doors can be adjusted back into proper position or is the problem caused by the fiberglass attachment points wearing out?


  2. #2
    Medium Load Member Don2WS's Avatar
    Member Since
    Feb 2010
    Location
    Sturtevant WI
    Trucker?
    WannaBe
    Posts
    300
    Thanks
    90
    Thanked: 24 Times
    this has happened to our t2000s the fiberglass skin is glued to the door frame and when the door was opened the skin would pop and the bottom hinges would hang. i took the door off and took of the spacer plate and replaced it with a sheet of steel the same thickness and bent that so that it could go around the corner of the door and reinforce the hinge area

  3. The Following 2 Users Say Thank You to Don2WS For This Useful Post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •