c12 dies then restarts immediatly
Discussion in 'Peterbilt Forum' started by shadowrider1, Feb 15, 2013.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
850,000 miles is what it shows on odometer i don't know the ecm shows
-
i'm also going to run another ground wire from frame to cab and one from frame to the engine, maybe it's losing ground when truck is moving
-
Posable but with no code I'm leanin on a comp problem. With 850 on truck that's really not to many miles for a comp but is posable. But could be a ground wire but dnt see that
-
would that make it die and restart then runs good sitting still even at high rpm it's when the truck starts moving that the problem arises
-
the more we talk about it the more it seems like to me i'm either losing ground or positive wire connection somewhere because of the fact that the truck has to be moving for the probleme to occur
-
Check both power and ground, it sounds like you have an interuption on one or the other. Its been my experience that on Petes its usually the main ECM power wire in the battery box, try pulling on those wires and see if it dies.
shadowrider1 Thanks this. -
Go the cheapest first then if that don't work well..
Could. Be a lose wire try what bubba saidshadowrider1 Thanks this. -
found it you were right i pulled the battery box cover off cranked it and pulled on the positive wire going to the ecm and bam it died fixed it by cutting off 3'' put new connector on drove it it runs perfect reason pulling from outside bat box didn't reveal the prob was the + wire was tied to the pos cable to starter had to be moved from inside box I WAN'T TO THANK ALL OF YOU GOOD PEOPLE i appreciate it off to work...........................
UTI TRANSPORT Thanks this. -
Good now get those wheels turnin lol
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3