MID 128 SID 231 FM2 error code.. what does it mean and how to fix it??

Discussion in 'Volvo Forum' started by bravoo67, Jun 14, 2012.

  1. bravoo67

    bravoo67 Light Load Member

    252
    34
    Mar 15, 2012
    Brooklyn NY
    0
    Pablo today before I changed injectors I did injector balancing test again and injector #2 was -40% but this time injector #4 was showing +40%, 5th one was "normal" (+10%)

    so I changed 2 and 4 and programmed all 6 trim codes because all of them wasnt maching previous trim codes in EECM..

    after all that I did balancing test again and again injector #2 is -40% but all others seem to be OK..

    Why its the same with new injectors in? Engine seems to misfire and has no power

    Compression test shows 95% on all cylinders and there are no error codes

    I did so much on this truck dont know where else to go :(

    Please help
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    Reset injector ballancing values now, after you change injectors
     
    bravoo67 Thanks this.
  4. bravoo67

    bravoo67 Light Load Member

    252
    34
    Mar 15, 2012
    Brooklyn NY
    0
    I did reset injector balancing values and it is still the same: injector #2 is -45% and inject #5 is +50% and over .. what else can be wrong? engine harness?
     
  5. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    the problem is in injector #5. Change it too.

    Really we use to change all injectors on D12 engines. They are old now.... no reason to do one by one....
     
    bravoo67 Thanks this.
  6. Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
    I have Volvo 2005 Cummins, ISX400 ST
    Won’t start, I changed for solenoid injectors, shut of solenoid, high engeen pressure valve, fuel gear pump, turbo charge valve, primer fuel pump is working, change ECM, Won’t start
    I have MID k and SID 231 FM 11
    Anyone can help me
     
  7. Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
    I have Volvo Cumimins ISX 400 ST
    I changed 4 fuel solenoid, high pressure gear pump, ECM, high pressure engine valve, turbo charge valve, primer lift pump is working, new shut off valve, won’t start.
    MID128 SID231 FM19
    Enybarry help
     
  8. waltherz

    waltherz Light Load Member

    129
    12
    Dec 12, 2012
    0
    did you fixed?
     
  9. Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
  10. Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
  11. QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,778
    1,722
    Jun 14, 2009
    romulus,mi
    0
    If you are in Elgin, get a hold of Nasriza and set something up. If it needs to be towed then so be it. This is too long to be sitting around. Already made a mistake by throwing parts at it. That money would have paid for tow plus more.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.