Finally solved the problem. There were 14 wires on ecm plug by plastic covering. When they assembled in factory did not put any other protection on wires like tape, just plastic pipe. Found corrosion on broken wires. Fixed by small shop in chicago. Its shame to freightliner dealer who could not find anything and just me charged money for doing nothing.
Freightliner electrical problem
Discussion in 'Freightliner Forum' started by simon999, Feb 6, 2014.
Page 3 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Good deal!!!
-
Do you have any info on the shop you used?
-
-
I have a 2007 Columbia the truck drops oil press gauge ,water temp gauge as well ,the fan clutch goes on together with check engine light not to mention a massive power loss, it won go over 15 MPH then it goes back to normal.even at idle it would go back and forth with this failure I replace both ECM wiring harness and the one that goes from batteries to ECM I don't know what to do anymore please help.Thanks in advance.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3