Youre not getting it. All I was saying is that on a 13 or 18 speed the splitter is separate from the range selector. Different gears, etc. they are not all housed in a 3 speed aux.
A super ten is similar to a 10 speed road ranger, they just are operated differently. With different gear ratios.
How to shift a 5 and 4
Discussion in 'Questions From New Drivers' started by slim66, Oct 18, 2008.
Page 6 of 8
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
it is just different ways of looking at it. The reason I refered to the 5x4 is, if the rear box is called a 4 speed, the overdrive is considered one of the speeds. So why wouldnt the overdrive in the aux section of a 13 also be refered to as one of the speeds making it a 3 speed. Just a difference in the way I view it from the way you view it. We both know how they work though
As for the super 10, there is two less gears (and I mean if you took the top off and looked in it two gears are missing. 3rd and 4th).There are only 2 shifter forks in the front section where a straight 10 has 3. You have a first and second gear and then the sliding clutch that connects the input to the mainshaft giving you the 3rd gear position. When you shift it into 4th you are using the second speed gear again but in hi range in the aux. Then when you go into 5th you are using the 3rd speed (direct) again in high range. Of course all 5 positions are split with the spliter in the rear section. I just threw the comment in about the super 10 just to see if you had ever been inside one before. -
are you sure the mail box flag was not the low air flag
-
The thing is a "WigWag" and it was a low air pressure warning indicator. After the engine built up sixty or more psi of air the wigwag would reset. The "Wigwag" never indicated engine or trans temp. I drove trucks where the gear oil was SAE 140 and the oil had to heat up in order for the transmission to shift freely. the procedure was slip the main into 4th or 5th gear and the aux into neutral. let the engine idle turning the transmission for about 10 minutes. The truck was then road ready.
-
-
The box to be upshifted is shifted first.
-
-
This sounds a lot like setting up button configurations on my xbox controller.
-
-
heyns57 said: ↑GasHauler said: ↑Let's say you are pulling a hill and need to downshift from 4th/under to 3rd/over, the auxiliary would be shifted first.Click to expand...
I had several old winch trucks sticks. Some days I miss it and others I turn the AC on turn the stereo up set the cruise and ride.Click to expand...
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 6 of 8
Related Categories
-
Hogan transport
Kimberly2 posted Mar 28, 2024 at 12:07 PM
-
A refresher
proxima posted Mar 27, 2024 at 2:24 PM
-
Required to carry SS card?
aramil248 posted Mar 27, 2024 at 2:05 PM
-
Murder conviction from 1994
VitoG posted Mar 27, 2024 at 11:41 AM
-
Why you do enroute inspections
gentleroger posted Mar 26, 2024 at 9:13 PM
-
Trucking companies that are...
JTBUSINESS posted Mar 26, 2024 at 4:45 PM
-
When did Michigan change their...
gentleroger posted Mar 25, 2024 at 9:09 PM
-
Changing route to go into wind
vanmcgill86 posted Mar 25, 2024 at 8:02 AM
-
Verifying experience
mr.layanethetrucker posted Mar 24, 2024 at 4:40 PM
-
Question about filing for...
bifig89 posted Mar 24, 2024 at 12:11 PM
Loading...
Recent Threads
-
Gapless second ring with Total Seal
turbobandit posted Mar 28, 2024 at 6:47 PM
-
Heads up in central texas for...
drvrtech77 posted Mar 28, 2024 at 5:58 PM
-
What Companies Are Currently...
BigTime1980 posted Mar 28, 2024 at 5:50 PM
-
Old Dominion Tire Fire On The...
mjd4277 posted Mar 28, 2024 at 5:38 PM
-
Insurance filings
gekko1323 posted Mar 28, 2024 at 5:24 PM
-
Front End Loader Mayhem In Georgia
mjd4277 posted Mar 28, 2024 at 4:55 PM
-
Someone finally sues C.A.R.B
Judge posted Mar 28, 2024 at 2:24 PM
-
Hogan transport
Kimberly2 posted Mar 28, 2024 at 12:07 PM
-
Truckstop.com
nikmirbre posted Mar 28, 2024 at 10:39 AM
-
400 Crashes
Grouch posted Mar 28, 2024 at 5:36 AM
Loading...