Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Qualcomm timeout

Discussion in 'Schneider' started by dieselfuelonly, Mar 20, 2014.

Page 3 of 4
  1. Apr 1, 2014 #21
    gentleroger

    gentleroger Road Train Member

    6,630
    17,315
    Jun 1, 2010
    0
    You don't need to fully start the engine. Once the QC loads up, just turn the key to the on position and you should have 90 minutes until it shuts down. Unless your battery is down, in which case you're not using your apu properly - I will be along shortly to take possession of it.
     
    gentleroger, Apr 1, 2014
    gentleroger, Apr 1, 2014
    #21
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 1, 2014 #22
    dieselfuelonly

    dieselfuelonly Road Train Member

    2,475
    5,082
    Nov 12, 2012
    Chapel Hill, NC
    0

    Mine will time out shortly afterwards when just "key-on-ing" it, and I know my batteries aren't the problem, that APU has been running non-stop for the past 28 hours keeping me nice and cool with AC so no reason the batteries would be low. One trick I have is to load up navigo - it seems when you interact with the qualcomm, such as loading navigo, etc,. it will stay on longer than just a normal wake-up.
     
    dieselfuelonly, Apr 1, 2014
    dieselfuelonly, Apr 1, 2014
    #22
  4. Apr 2, 2014 #23
    the mary trucker

    the mary trucker Light Load Member

    146
    86
    Aug 9, 2012
    0
     
    Last edited: Apr 2, 2014
    the mary trucker, Apr 2, 2014
    the mary trucker, Apr 2, 2014
    #23
  5. Apr 2, 2014 #24
    mickeyrat

    mickeyrat Road Train Member

    7,834
    7,505
    Nov 24, 2011
    on my 30 min break
    0
     
    mickeyrat, Apr 2, 2014
    mickeyrat, Apr 2, 2014
    #24
  7. Apr 2, 2014 #25
    dieselfuelonly

    dieselfuelonly Road Train Member

    2,475
    5,082
    Nov 12, 2012
    Chapel Hill, NC
    0
    Oh man I had one in my company truck that did that. If it was just in a light sleep, like it does during the day, it wasn't a problem, but if the truck was off for 3-4 hours, it would do that same thing. POP POP POP POP POP POP POP through the truck speakers for about 6 minutes, then a minute of nothing, then it would FINALLY boot up. I made it a little better by disabling it through the truck speakers and making it "pop" through its own internal speaker which wasn't as loud. Eventually I got used to it but it took me a good 2 weeks to.
     
    dieselfuelonly, Apr 2, 2014
    dieselfuelonly, Apr 2, 2014
    #25
  8. Apr 2, 2014 #26
    the mary trucker

    the mary trucker Light Load Member

    146
    86
    Aug 9, 2012
    0

    It's the starter relay but no quick fix and I don't think ours stops after 6 min but I may just not be able to listen that long. I really get in edge when it happens. We just unplug it for the night because it will start in the middle of the night and that really irritates me. However taking the sound out of the speakers is a great idea. Thanks
     
    the mary trucker, Apr 2, 2014
    the mary trucker, Apr 2, 2014
    #26
  9. Apr 3, 2014 #27
    jakecat22

    jakecat22 Road Train Member

    1,523
    26,293
    Jul 1, 2011
    Ohio
    0
    That happened to me, same thing, when I went to leave after unloading.

    I unhooked the power cord from the box and the clicking stopped. I waited 15 seconds and plugged it back in and my QC worked again.
     
    jakecat22, Apr 3, 2014
    jakecat22, Apr 3, 2014
    #27
  10. Apr 3, 2014 #28
    mickeyrat

    mickeyrat Road Train Member

    7,834
    7,505
    Nov 24, 2011
    on my 30 min break
    0
    thats what IT had me do too. nothing came on after unplugging replugging it back in. EXCEPT THE CLICKING NOISE!!!!
     
    mickeyrat, Apr 3, 2014
    mickeyrat, Apr 3, 2014
    #28
  11. Apr 9, 2014 #29
    moosc

    moosc Road Train Member

    3,284
    1,171
    Mar 5, 2009
    Lincolnton NC
    0
    Another trick I do is use the qc as a alarm clock. That way when I get up its on
     
    moosc, Apr 9, 2014
    moosc, Apr 9, 2014
    #29
    91B20H8 and mickimause Thank this.
  12. Apr 9, 2014 #30
    mickimause

    mickimause Road Train Member

    1,662
    2,007
    Jan 1, 2014
    Central Michigan
    0
    Does it alarm on local or log time? Cause I am in the Eastern zone right now, but my logs are Central...
     
    mickimause, Apr 9, 2014
    mickimause, Apr 9, 2014
    #30
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 3 of 4