I had a 2005 EGR MBR4000 in a Cascadia. They did have problems in the early years. The biggest problem was a lack of parts back then now not so...
If you live to spend it, it's not too bad of pay. [ATTACH]
Actually WinCE is a fork of Win95 and the last update was back in the early 2000s. But it's still crap and should have been phased out years ago.
Maybe, hard to say if it comes from higher up the chain or just a shop thing.
Yep, and when I 1st got it took 3 hours to get it to start At which point I told them the batteries were bad but they refused to change them...
Why? from what I was told the shop that make a repair that repair goes on their budget and counts against them. Which is why I got a truck from...
The one were they dress like Aaron Coffman from ### Monkey and spend more time oiling their beards than working.
[ATTACH] I just left Marten because their crap maintenance. Like putting worn out drums back on to save a few bucks, but the brake shoes only...
If you have a empty bin you can turn off the aerators,open the blow down valve with the bypass /hotline valve open. close the gate valve on the...
I worked at a fleet back in 88-91 that did dump the old oil in the tanks at service. That was fine for the NTC315 PT pump cummins, they would burn...
WE went to sandhog T's, We got 2 to 3 load out aluminum fittings on the black sand trailer. Now we get over a year on the T's and the sandhog 45...
Aluminum has X number of cycles until it's fatigued out and must be scraped. How many 40 and 50 year old airliners do you see? X number of cycles...
Pneumatic bulk tank company will pull 30 to 40 year old fatigued tank out of salvage the yard, dump a butt load of money in it to get it to pass...
Really wish they would make a swing through the mid-west and smack some of these places with big fines.
[ATTACH] Yep, God knows what coming out of those tank cars.
[ATTACH] Like people who build tanks for a living and build their own black sand tank and use sc40 electrical conduit for 180 degree bend and...
[ATTACH] Two old tank cars standing on end behind the tracks so they have to stop work to fill the tanks. They tried a long hose (which is what...
Just about every bulk plant I go to is a hot mess. 20150806_142436.jpg [ATTACH] Toxic wast from the rail cars they repair here. It did have a nice...
You need to know the job the truck will do before you spec it. I've had bulk haul job with truck spec for a pulling a van. Which had a 5th wheel...
My 1995 5EK 3406 just needed a 1999 flash file to work with a EOBR. If i remember It was no charge at the cat dealer, but I was having other work...