A quick, cheap and easy approach to reduce drift on Galaxy's would be to attach a resistor to the side(s) of the crystal to provide the heat...
Are you referring to the RFX 75 Powerband replacement deck ? Just to be clear here .....
This Uniden chassis is hard to beat for durability. Regardless of WX capability or not. They tend to have a better receiver than the exports, in...
Did you check to see the internal speaker isn't disabled.
Wow Props out to the New Guy here ..What's Going On Al ?
Noman Where are you taking your SWR Readings, so far you havent mentioned an inline meter. Are you taking your SWR readings from the radio's...
Noman, explain in a bit more detail about the problem if you can, Where are the power and ground wires going to ? Where and how is the antenna...
On the interstates during rush hour round the metro area here its "Get outta the hammer lane will ya ". Thats the first thing ya hear.
May be server was refreshing, got a hold of admin there and email reply was sent..SIXX
Yep those Ranger's look nice definitely, better than the Ranger TLM-1 with the MP3 screen. Thanks for the 411 on the radio .. Your ever get a...
The RFX install does work well on these radios for the most part. Decent filtering (low pass filter) and teflon coax is a nice feature. When I had...
JJD This rumor goin around is this basically same inside as Ranger 127 with alot more features. What is your showing output wise ? BTW Had a...
Why would you try to discredit the harmonics idea ? The change here is a direct result of the amp being turned on. The impedance mismatch as...
The antenna is not the problem. In this case, it is the amplifier,with the radio only, the SWR is 1.5:1; when the amplifier is turned on, the SWR...
Good to have ya onboard BDW, I have seen a few of your modulation tutorials, great reads indeed.. SIXX
I expect that the receive transistor is not working. Replace the transistor behind the receive switch or could be the switch itself.
The power cord is unique. The radio uses an Anderson type quick disconnect for power and the radio uses a external SO239 connector for antenna...
For a Complete Transmitter Alignment TX, the shop in question should have a Bird PEP wattmeter and scope on their bench. Used to monitor radios RF...
TNT 1200HD Transistors 6x 2SC2879 Dimensions H 4 3/4' x L 11' x W 6 3/4' Amp Draw (maximum) 120 Class B SSB Delay yes biasing Pre-amp yes...
Thunder is referring to the Connex 3400 HP which uses a slightly different board than the 3300 HP. Switch positions and features are also...