Post#8 has a picture of my fuse panel. The slot with the white jumper wire is where the relay for the trailer brakes goes.
It usually boils down to a fuse, relay, or both. Relays are easy to troubleshoot, just swap it with a known good one (I always use the ac...
No power at the fuse? So no brake lights on truck or trailer?
Loaded and mty.
They'll block your fifthwheel when they install your wet kit, and install a Right Weigh air gauge somewhere on your cat walk so you can see your...
I can make more, but I have my routine setup so I don't owe taxes at the end of the year and I get to "stash" $25k. If I make more, it would put...
I do one week home for every four weeks out. I have not, and will never work 52 weeks. I have a family and #### to do. I do my best not to gross...
Both sides? It's a bulk head connector so there's a nut that keeps the male end of the plug from falling up into the fuse panel. The female end...
Unscrew that connector and check the pins there. That connector is the opposite end of your pigtail. Find the pins that correlate to the yellow...
Do the turn signals work at the pigtail?
Yep, I started with an end dump and did that for three or four years, then switched to tank for a year, quit and did flatbed over at Landstar for...
I'm not an end dump. [ATTACH]
There's no set rate, it varies by customer.
We get detention after 2hrs
I'm not sure about Detroit, but with cummins you can log into quick serve with your engine serial # and get ANY part number in relation to your...
Engine stuff (belts filters) use engine serial number.
The dpf is only about $2400 before the core return. Mines is about $1700 after core return. I don't have a DOC. Most places would rather sell a...
The Sensor Connection EGT Probes Motorsports Sensors and Gauges This will let you monitor up to 12 probes. I have the single probe analog version...
I just did the search also, that probe would plug into a wire harness. His truck may or may not have the needed wiring harness. But the gauge...
Ok, those are actual gauges.