Seeing that everything is going up, what are you doing and what can be done to cut cost. On the otherhand what do/can you do to increase revenue?
I'm on a never ending to quest to cut my cost. Tires are a big exspense. Im wandering which brand gives you the most bang for the buck. In other...
I heard there was a product that seals leaks and keep tires cool. Im not sure how to get it or what it is called.
Does anybody know of any products that will keep tires cool? I usually run recaps and have had an occasional blowout. Id like to try keep them...
I wander if they need be repalced when ever you have a jake issue and the jake must be removed?
No, I torqued them to 80. Actually a mechanic put the cam in for me. Then I had to replace bolts on every Jake head. When I replaced these bolts...
No, I have'nt noticed any difference in the jake. But so far I have broken 8 jake head bolts. Hopefully the new ones will hold up.
I have 3406e cat 5ek 475. I put the 800hp cam in it and for some reason I keep breaking the hold down bolts. Cat has updated the bolt Im wandering...
Take them off and paint them with clear paint.
How does the truck run? The guage do go bad from time to time. If you don't notice a difference in performance replace the guage. I just replaced...
The reason for the tranny swap is the 10 speed needs new synchronizers the money that I would use to fix it I could use for another transmission....
How important is gear ratio when trying increase fuel mileage? I have a Tri-axle dump truck 4:33 gear ratio and fro 16210 transmission. I can...
Does the 3406c have steel piston? What about some of the heavy machinery that had 3406 engine like a 977?
It seems your real power range is from 1500 and up. When on a nice long grade to allow you engine to lug down to 1200 rpms with a heavy load seems...
I have 3406b 425 cat that needs rebuilt. Some time ago a guy told me that 3406e piston would fit in this block. If this is true which ones will...
I tried to lug it down to 1200 rpms but it seem like a waste of time. Im in Pittsburgh and there are alot of hills around here. It seem like...
Its a 1997 3406e 5ek. 1100 1200 rpm wow thats seems low to me I usally shift at 1400-1500 rpms. I guess I will have try it.
I just bought a a International 9300 with a 475 cat. Im used to driving a Big cam Cummins I notice right away that the Cat pulls in the lower...
I personally run my Jake 98% of the time although I dont drive over the road I run locally. The Jake brake is a tool. A tool that give a driver...
Mr Haney I never got your info.