Friend of mine always uses a high temp governor, may try one of those, but I doubt it is the problem
First, I don't mean to hijack here but I have a very similar problem. Just a little different, mine blows air directly out of the purge outlet...
Gambi, you and I are doing the same type of work although I have been doing a lot of road reconstruction. That said, I use the cheapest closed...
3" is the worst! if I have to drive on fresh stone to dump, or more accurately to leave after dumping, I back and pull forward several times to...
Could also be a mechanical flasher with all led lights, not enough resistance to make it flash.
You may want to check out SIRCO for parts, you can get just the jaws, or a full rebuild kit with everything but the plate, they are a little more...
Being a lifelong resident of the most corrupt state in the union, I have had some luck in the past with the Illinois secretary of state police,...
I like the duct work! never saw that before. :biggrin_25514:
This Krown looks a lot like a product here called Fluid Film, I just started playing with this stuff so I can not say much but every review I have...
If you want to see what your waste gate is doing hook up an air line with a paint regulator to the actuator can and slowly turn up the pressure...
Hey Gambi, I found a used one and so far so good, Pete's price is just insane. For your info, if you haven't thrown the old one out, the used one...
LOOK UP!!!
Hey, I used a company called Super Slide, and I got the liner from a factory store in Wisconsin Dells, Wisconsin. I have to tell you it's a big...
Hi, I thought I would finish this for anyone interested. The short story is I replaced the speedometer head with a used one and it seems to be OK...
Heavyd covered it pretty good for you, IMO the diff should be easily repaired, I doubt much more than the cross and spider gears were damaged.
Hey, I have a somewhat similar question I would like to ask rather than start a new thread. Same motor as Diesel Dave, I started it one morning...
13 volts or better it's working, 12 volts or less it's not.
Hey, thought of one more thing, I always put some lube in the well of the hub. sometimes there is a pipe plug in the hub you can take out to put...
Thank you Duramaxxed, sounds easy enough to look into. Funny how things change, I can remember when volt gages first came in vehicles I thought...
