The aftermarket kit had a better parts warranty than the CAT kit? Where did you get this kit from? Cat has engine rebuild kits available that you...
If the deck of the block looks good (absolutely no damage which I'm assuming you know that) and all the liners are on the low side of the spec I...
Loosen the check valve your mechanic replaced and have him re-torque to the proper spec. Torque it to 18 ft. lb. If he used the updated check...
Unless they were improperly torqued from the factory or a recent service repair the loose bolts aren't a good sign. I've seen a great deal of...
Did your engine originally have the weaker check valve installed?
I think if I'm remembering right 93 is possibly an IVA not responding. Pull the valve cover,if you have an NXS you will see a small aluminum piece...
Seems to me it would be the other way around. There is an advance mechanism to advance timing when the oil is cold hoiwever. Could be coming from...
Yeah that pump is pretty heavy.Pin time the flywheel. you will see a 3/8" plug in the side of the pump. This is your timing hole for the injection...
Sorry man that was a typo.. Should have been a 256-8753..
How do you build 20 psi of boost at idle? I had one that give me fits and it turned out to be the boost presure sensor could not "see" the initial...
I've seen worse and better...if it keeps bothering you check the turbo. From the video it looks like a steady force of blowby. It's not puffing...
http://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=showflat&Number=2097337 Heres a link to a 1R-1808 oil filter cut apart..some nice pics
Check out a Cat 256-8753,175-2949, and maybe a few others..how many time have you looked into the f/w separator and you can actuall see the metal...
Does the new Fleetguard f/w separator have a built-in stand pipe like the newer 256-8753 Cat filters and a few other brands I've seen?
The correct valve number sould be a 304-9385 rated at 100 psi.. Some of the engines had a 282-5091 valve installed that was rated at 82 psi. If...
A long time ago Caterpillar and Donaldson formed a joint venture company called AFSI (Advanced Filtration Systems Inc.) to manufacture an advanced...
Sounds good. Where's Pinckard at? Never heard of that place...If you turned your bypass valve back on more than likely you will see some fuel...
There is a fuel restrictor inline in the fuel return line going back to your transfer pump. It's secured just below the air compressor and it's...
Cat had some issues with some of the early SDP engines equipped with the wrong fuel return bypass valve. The fuel pressure was too low. May not be...
Check your stand pipes in your tanks...I've seen these fatigue and a hairline crack would develop. Also I'm sure it would be leaking and you would...
