Hood is very tight, that was another thought, no extra thumping on bumps really. Cab shocks are new. I'll start with motor mounts. Thanks.
I was wondering about the mounts. I'll have to look close at them or just swap them and see. It's old enough, probably needs them anyways....
Wanted to try quieting down our fld120, so I put dynamat and liner on floor and back of cab. Still need to do the rest but the floor thumps a lot...
Michelin Advantage program is what you need to sign up for. Prices are very good and its a free program, you get your own national account.
sounds like you must have had the M726 possibly? Those tires are long wearing, but have a very high rolling resistance. Regular M726 are 175,...
Depends on the motor. The C13 ACERT in our T600 peaked at 1450rpm (403rwhp) and held within 5hp to 1600rpm then fell off.
Really? I couldn't get any life out of the FS560s. They never wore straight either. Run XZA3s on steers and XZE2s on the trailers now and...
I just don't trust K&N stuff. I hate dealing with their filters whenever they come in. The factory paper filters do the best filtering job and...
You can calculate the speed easily, but the amount of power it takes to overcome the forces at those speeds is high. Take our T600 for example,...
Yes they do work now. Looks great, by "red" bar I assume you are referencing the "brown" Tripoli bar? Colors vary among manufacturers slightly...
Fiat Powertrain uses it on some of their off road motors. Other OEM's are as well. Cummins is too.
I get them from various places. Busch shine carries a lot of them. I get compounds from them, Caswell, and Zephyr. There are a ton of companies...
The sander and polisher add up to around $400 on their own, but can be used for numerous things. I use a couple different Flex polishers for paint...
This one took a couple hours with all the sanding. If it wouldn't have needed so much sanding it would've been much quicker. Theres plenty of...
I think a lot of people may just be seeing the difference in the Cap width, not every tire gets the same tread width. Couple that with the...
Polishing Aluminum has always been rewarding for me. Its the one thing you really see a big turn around on and I just like working with it. Over...
Wont be hauling for any large companies, just to small farms. Most of them just want a number on what it will cost. Any ideas on where pricing is...
Looking for some insight on pricing out hauling bulk commodities for people as I am starting to do more and more of it. The main one I am hauling...
Unloading milk at the plant, we haul our own milk from our two farms. Miss this intake plant, very nice large 8 bay. The one we are at now is...
Your right,i had a brain fart.
