i was thinking power divider and rear suspension dump there defiantly air switches ♂️ flip em and find out.
tread plate call any metal supplier in your area.
my dog has been on many on many military bases. they will probably ask you to take your dog out on a leash while they inspect your truck, carry...
its simple to use i use it here and there when its the best deal.
as mentioned to convert to a flatop you would also need to change the roof cap on the cab also a new boot ring and new headliner overhead console...
as ashamed as i am to admit it, a few years ago when i went to get my bike out of the storage unit in the spring the battery was dead so i pushed...
that's great but can it haul 66k lb loads? such a small % of my fuel spending is on my personal vehicle i don't really care what my personal...
[IMG]
downshifting due to loosing speed pulling a grade i normally just take a full gear like you would on a 9 speed pull it down to the bottom of the...
if you bought the truck and you own it, take it to a dealer and have the ecm settings changed to your liking you should have a pto mode as well...
its not that hard to do yourself. you can do it threw the fmcsa website, you will need a 3rd party for the boc-3 i used ooida for that. no charge...
two things that are almost never copied and make it really easy to spot are the air cleaner elbows vrs straight into the cowl on the later trucks...
i drove a bran new 389 for a little while around 2012 right off the showroom floor i was never that impressed with that truck, i thought the 379...
iv hauled quite a few loads of potash fertilizer in a hopper bottom. not really much different than any other load. its a fairly dense product and...
find a good local mechanic. chances are your truck will at least need a service if not other repairs when you get home. they will likely let you...
glow pins rarely ever go out. you should probably have a extra one because they are some what easy to break the ceramic or the wires off when...
another nice thing about precision interments is they are made in the usa even right down to the blow molded case.
probably 30-40 man hours possibly a little more if counter bores need cut ect. mabye a little less if a guy skimps a bit on on cleaning and prep...
my 359 has a king cruse unit on it, it was on the truck when i got it, hasn't worked as long as iv had the truck but i really haven't messed with...
iv got a video on that ;-)
