Thank you. I didn't realize the 11 Meter mod also unlocked 12 Meter. All makes sense now.
Hi, Just set up my, fresh out of the box, Stryker sr-955hpc radio. I have not performed the 11 meter mod yet but, I am only able to make channel...
Ken's Electronics S/RF and Watt Meters for CB'ers at Ken's Electronics, (Wholesale & Retail Electronic Parts) Kalamazoo, Michigan They have many,...
If you mount the radio on the bottom side of the cubby, from a bracket. Use rubber washers both inside and on the outside of the mount as you...
Again. What 35 watts are these guys talking about"?" Can some one explain? I all confused?
Don't get confused between your ground plane and grounding the metal fence rail. The ground rod you drive into the earth is to ground the metal...
It's a possibility the after market mics are not wired the same as your Cobra mic? The 29 LX's I've worked on didn't have any problem using any of...
I run a Cobra 29 LTD Black Chrome w/ an RFX75 at 80 watts, 102" whip attached to the top of a 12ft wooden 4"x4" placed in ground beside my house....
I would leave the "Sound Tracker" feature alone. These Cobra 29 WX NW ST have a problem with squealing when you work with the sound tracker...
Sounds like you have a low swr. Great! You can leave it at 1.5. Or lower the whip. Your choice. Your radio will run great. Jimbowilly
I install 10mmx10mm fans on my big radios. And have no heat problems afterwards. Jimbowilly
Most likely the ground wire is your problem. Try connecting your ground wire to different grounding points. Cut a 10ft to 20ft piece of 14 ga...
I agree w/ Outlaw CB. Everything he stated is top notch advice. Ground your radio to the frame. Check to make sure the ground stud ( if this is...
Is this a Cobra 29 lx or a 29 lx bt? Cobra lx radios will work with the mics you purchased. If this radio has bluetooth? Then you have to use a...
Also. Thanks Rat, for providing some great information. Jim
Since my original post in 2011. I've set up a bench and taken up tinkering with cb and 10 meter radios. Replacing shorted parts. Upgrading...
It seems with me at least. 2 yrs is all I can take working for a trucking company. It's not the inexperienced supervisors, or the company...
Peak and Tune cost anywhere from $15 - $35.
Hi, It helps if you read the postings before you reply. Otherwise someone might not take your information as being credible in the future. "?"...
That would be awesome! $35 for 35 - 40 watts on a Cobra 29 LTD Classic. Wouldn't every trucker dream of getting a run up to Grand Rapids, MI....