Just finished cleanup of decks and bolt holes, cleaned inside bolt threads. Will check #6 today, layed straight edge across them yesterday all are...
I'll give you a little update on progress, pulled head. Head bolt between #5 cylinder and #6 on passenger side off center of head was hand tight....
It never did leak from the top, you could visually see that once you pull injector. I was hoping it was leaking from bottom threads, the drip is...
Checked harbor freight but end won't fit into cylinder because it is bigger than the threads on the cup. I took a cup with me to check it out....
All water emptied out when I drained radiator, looking for advice on what to put on the thread cups, detriot recommends nickle based anti seize,...
These are the thread in type for a 14.0, had to buy all 6 cups. The cups in my truck or a copper colored and now freightliner says that they have...
I am going there today, but don't know if they will have something that fits thru cup hole. Stopping at freightliner and picking up cup on the...
:biggrin_25521:Coolant in oil .018% in 15,000 mile change, #6 cylinder trickling water back side of sleeve, pulled injector and inspected. Not...
If you pull the injectors you should replace cups, even if it is not a new injector, but the ones you took out correct. I'm looking for a water...
Please help! Can you water test a N3 injector cup without injectors in place?
Please help! Can you water test in N3 injector cups without injectors in place?
I want to thank all of you for your post, I live about 15 miles away from my parking area. I figured it will cost me about $880.00 a year if I...
I have detriot engine and was wondering if a could hook up my 1500 watt converter to batteries and use a extension cord to the engine heater...
Don't understand 100%#37; fsc.
I was told we pay percentage on Fuel Surcharge, which at the time was 22% and fuel was at 3.76 a gallon. I did the math of what they were paying...
rollin coal, Don't understand 23%, are you a driver, looking for 75% O/O. To me % is a joke, how do you know how much the load really is, plus...
Thanks BigBadBill, I never got back with because I kind of figured it was something outside of home every night. I could run logs loaclly for...
Haven't really been there that long, they look out for themselves and you need to do the same. So far they have been okay by me, you have problems...
shogun, Running for IMCG, rates running about $1.50 a loaded mile, the catch is a can decide on weight of load and where I am going. What kind...
woodgraine83, You can expect about $1.50 loaded per mile, $1.00 empty, they run on computer which will be a $1,500 escrow taken out in the first...