This is from off of Insite.
ESN or VIN ?
Need to hook up to Insite and road test it to see what is going on.
That diagram you have is about the only thing you will probably find. Do you have a constant 12V at the solenoid when key on? Next thing I would...
The part number pulls up as engine shutdown buzzer.
Owner said everything is working ok. The owner came in a few weeks ago complaining that he had an alarm going off and he didn't know where from....
I know this is an older thread. I have a customer that has no 12V to fan solenoid, it has a good ground. I put air to the clutch and it works...
This is what the one in the truck I was working on looked like. It was to the right side of the long bar of circuit breakers that run up the...
I have one here now that has the buzzer in the bar box and an additional one in the fuse box. The one in the bar box is shutting off but the one...
Adept Ape has the channel to watch on CATs. This video explains it all. Around 7 mins he explains about the bridges to IVA and the o-rings under...
I am not a fan of aftermarket sensors. I will use them in a pinch but not at all for oil pressure. I would check the harness real good and then...
Sounds like injector cup issue.
Did you go from Halogen to LED? Some require you wire the lights differently.
Yeah I would say the liner o-rings were weak and coolant went around them. Did the truck shut down when the coolant went low. It sure does not...
The best thing to do would be have the old one cut off and then to have a new stub shaft welded on to the end.
And of course those prices did no include the Jakes. R17537 (3) 2200.00 each with a 140.00 core charge.
Reman parts are going to be expensive. Are you going to try to find used? This is what I think it would take. Before you or anyone else...
Thanks. I have those schematics. I just can't figure out Vehicle to Cab. It is probably Digital inputs that I will not be able to figure out....
A/C is off. There is one sensor on rear of head that runs to the ECM sensor side. I was thinking from there it went out the vehicle side of ECM...
Unhooking the fan solenoid made no change. He said it does not mess up as much once the engine is hotter. But when cold the gauge is wonky and...