Id just go with enough shim to fix the damage and bring it back to spec. Then the next time its apart it could still be cut deeper if it ever had...
I have no experience with the inserts, just with the shims. 9Y3368 is the shim I use on 95% of block cuts. .032 thou. Then go up in shim size...
X2 on steam cleaning it. Pull all the oil galley plugs down the side and wash everything out. Blow it dry with compressed air after and make...
Ive pulled cabs with straps through the window holes to an overhead lift. Just pulled a sleeper yesterday with a tracked skidsteer with...
The the fretting isnt bad the deck cut will also fix liner fretting. If the fretting is bad enough decking the block wont fix it they will...
SA= Steer Axle
Grade 8 3/4 bolt. Not sure on the length, you will have to measure. Going to have to remove the mounts off the engine and off the frame rail for...
It was the original Paccar field fix before the updated 4 bolt mounts were available. Ive drilled alot to 3/4 and never had a failure. So...
Ether need to update the mounts to the 4 bolt per side style or drill out your 2 bolt mounts to take 3/4 bolts. It was an issue on the first...
Assuming the fuel return checks are being done properly and all under spec, when you pull the pump head push the plungers into the pump head and...
If it got a new pump on it the pressures can be different from what they used to be. The new pumps also dont use shims anymore either. I still...
Bad resistor is fan only works on high speed, all other speeds do nothing.
Looks like a Priestman VC long reach The Priestman VC range " a unique concept [ATTACH] [MEDIA]
[ATTACH]
Start at the start. Truck isnt a new truck anymore. Load test all the batts. Remove and clean all the connections. Remove the starter...
Scroll down to cylinder head passages. I think that should be it
Ignore the 1939 fault unless it keeps occurring. The second code is probably the issue. Go to either monitor or simulate, cant remember which...
Did you actually do the hvac actuator test with ESA where it lists off all the actuators and a pass/fail? Checking codes is not good enough, Are...
It is to keep heat in the exhaust to meet emissions. Normal operation, cannot disable it.
Talk to your dealer. Rh door module needs replaced and then remotes programmed. Very easy to swap