2009 prostar turn signals

Discussion in 'International Forum' started by big ron, May 8, 2015.

  1. big ron

    big ron Bobtail Member

    1
    0
    May 8, 2015
    0
    What is to be done? Turn signals/hazzards work on tractor and drivers side of trailer but the passenger side of the trailer are intermittent. Traced back to harness going into firewall. wondering if it is the harness or the signal switch on the column?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Heavyd

    Heavyd Road Train Member

    7,626
    6,027
    Feb 4, 2009
    0
    Your turn signal is fine if it works ok on the truck. The body controller turns on the trailer turn relay in the fuse panel. Make sure the relays and breakers are good.
     
  4. Dwayne Walker

    Dwayne Walker Bobtail Member

    1
    0
    Dec 5, 2016
    0
    Which relay would that be?
     
  5. Heavyd

    Heavyd Road Train Member

    7,626
    6,027
    Feb 4, 2009
    0
    They will be labeled on the back of panel.
     
  6. Catdog1235

    Catdog1235 Bobtail Member

    1
    0
    Feb 11, 2023
    0
    2009 pro star trailer, turning signals power is on all the time
    Relays are brand. New fuses are good.
    Any thoughts what to do?
     
  7. Heavyd

    Heavyd Road Train Member

    7,626
    6,027
    Feb 4, 2009
    0
    Body controller could be locked up, try a cold boot. To perform this, disconnect batteries for 1 minute and reconnect. If they are still on, remove the left kick panel next to the clutch pedal to access the body controller. Disconnect blue connector. If they stop, then something is wrong with the body controller and further diag is needed. Are both left and right turn stuck on? Do they flash or on solid?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.