Cat trouble codes

Discussion in 'Trucks [ Eighteen Wheelers ]' started by underpsi, Feb 5, 2009.

  1. underpsi

    underpsi Road Train Member

    Messages:
    1,268
    Thanks Received:
    263
    Joined:
    Sep 18, 2008
    Location:
    Toronto, Ont
    Does anybody know of a place online to look up trouble codes for a 3406E?
     
  2. C16KIWI

    C16KIWI Medium Load Member

    Messages:
    579
    Thanks Received:
    133
    Joined:
    Jun 14, 2008
    Location:
    New Zealand
    When I brought the truck new I got a laminated page with all the codes on it for the C12-15-16 and the E I will try and find it and post it on here later today.
     
  3. CaterpillarWrench

    CaterpillarWrench Light Load Member

    Messages:
    188
    Thanks Received:
    48
    Joined:
    Nov 11, 2008
    Location:
    Wrenching feverishly
    Diagnostic Codes


    Flash Code Code Description of Code
    00 52-11 Air Inlet Shutoff Shutdown
    84-14 Quick Stop Occurrence
    171-03 Ambient Air Temperature voltage high
    171-04 Ambient Air Temperature voltage low
    171-11 Ambient Air Temperature Data Lost
    224-11 Theft Deterrent Active
    224-14 Theft Deterrent Active with Engine Cranking
    246-11 Brake Pedal Switch #1 Fault
    247-11 Brake Pedal Switch #2 Fault

    01 71-00 Idle Shutdown Override

    12 111-02 Coolant Level signal invalid
    111-03 Coolant Level voltage high
    111-04 Coolant Level voltage low

    13 174-03 Fuel Temperature voltage high
    174-04 Fuel Temperature voltage low

    14 121-05 Low/High Retarder current low
    121-06 Low/High Retarder current high
    122-05 Med/High Retarder current low
    122-06 Med/High Retarder current high

    21 41-03 8 Volt Supply voltage high
    41-04 8 Volt Supply voltage low
    232-03 5 Volt Supply voltage high
    232-04 5 Volt Supply voltage low

    24 100-03 Oil Pressure voltage high
    100-04 Oil Pressure voltage low

    25 102-00 Excessive Boost Pressure
    102-03 Boost Pressure voltage high
    102-04 Boost Pressure voltage low

    26 108-03 Barometric Pressure voltage high
    108-04 Barometric Pressure voltage low

    27 110-03 Coolant Temperature voltage high
    110-04 Coolant Temperature voltage low

    28 91-13 Throttle Sensor Calibration

    29 30-08 PTO Throttle signal invalid

    30-13 PTO Throttle out of calibration

    31 84-01 Vehicle Speed loss of signal

    32 91-08 Throttle Position Invalid

    34 64-12 Secondary Engine Speed loss of signal
    190-12 Primary Engine Speed loss of signal

    35 190-00 Engine Overspeed Warning

    36 84-02 Vehicle Speed signal invalid
    84-08 Vehicle Speed signal out of range
    84-10 Vehicle Speed signal rate of change

    38 105-03 Intake Manifold Air Temperature voltage high
    105-04 Intake Manifold Air Temperature voltage low

    41 84-00 Vehicle Overspeed Warning

    42 22-11 Primary to Secondary Engine Speed Signal Calibration
    22-13 Engine Speed Signal Calibration Not Performed

    46 100-01 Low Oil Pressure Warning
    100-11 Very Low Oil Pressure

    47 71-01 Idle Shutdown
    71-14 PTO Shutdown

    51 168-02 ECM Battery Power Intermittent

    55 N/A No Diagnostic Code Detected

    56 253-02 Check Customer or System Parameters
    253-11 Check Transmission Customer Parameters

    58 231-11 J1939 Data Link Fault
    249-11 J1922 Data Link Fault

    59 252-11 Engine Software Incorrect

    61 110-00 High Coolant Temperature Warning
    110-11 Very High Coolant Temperature

    62 111-01 Low Coolant Level Warning
    111-11 Very Low Coolant Level

    64 105-00 High Intake Manifold Air Temperature Warning
    105-11 Very High Intake Manifold Air Temperature

    65 174-00 High Fuel Temperature Warning

    66 54-05 Auxiliary Output #06 current low
    54-06 Auxiliary Output #06 current high

    67 55-05 AuxiliaryOutput #07 current low
    55-06 Auxiliary Output #07 current high

    68 191-07 Transmission Not Responding

    71 43-02 Key Switch Fault

    72 1-11 Cylinder #1 Injector current fault
    2-11 Cylinder #2 Injector current fault

    73 3-11 Cylinder #3 Injector current fault
    4-11 Cylinder #4 Injector current fault

    74 5-11 Cylinder #5 Injector current fault
    6-11 Cylinder #6 Injector current fault
     
    Last edited: Feb 5, 2009
    underpsi, elharrison, Flyer and 3 others Thank this.
  4. C16KIWI

    C16KIWI Medium Load Member

    Messages:
    579
    Thanks Received:
    133
    Joined:
    Jun 14, 2008
    Location:
    New Zealand
    Flyer and Moving on Down the Road Thank this.
  5. underpsi

    underpsi Road Train Member

    Messages:
    1,268
    Thanks Received:
    263
    Joined:
    Sep 18, 2008
    Location:
    Toronto, Ont
    None of the the codes my driver said he was getting is on that list. They were coming up on the cat display he said ever since they have been coming up the truck has been sluggish. codes he gave me were...

    179-02, 175-05, 135-12, 032-000, 192-00

    I got him to try the thing with his cruise switch and hes getting 5 and 5 flashes
     
  6. CaterpillarWrench

    CaterpillarWrench Light Load Member

    Messages:
    188
    Thanks Received:
    48
    Joined:
    Nov 11, 2008
    Location:
    Wrenching feverishly
  7. underpsi

    underpsi Road Train Member

    Messages:
    1,268
    Thanks Received:
    263
    Joined:
    Sep 18, 2008
    Location:
    Toronto, Ont
  8. CaterpillarWrench

    CaterpillarWrench Light Load Member

    Messages:
    188
    Thanks Received:
    48
    Joined:
    Nov 11, 2008
    Location:
    Wrenching feverishly
    I just double checked.The codes for a 5EK are the same as these.
     
  9. underpsi

    underpsi Road Train Member

    Messages:
    1,268
    Thanks Received:
    263
    Joined:
    Sep 18, 2008
    Location:
    Toronto, Ont
    They aren't on there though. I believe he also said its says with the codes Diagnostics Unassigned So whats that suppose to mean? No actually meaning to those codes? He says its not running right
     
  10. C16KIWI

    C16KIWI Medium Load Member

    Messages:
    579
    Thanks Received:
    133
    Joined:
    Jun 14, 2008
    Location:
    New Zealand
    Hey Cat Wrench,This is completely off topic,but do CAT have lower compression pistons for marine use ?????