I have a Diesel echo mic, I think model 4-7, and some of the wires from the cord to the circuit board have become detached. I'm looking for a schematic or an internal wiring diagram so I can get it working again. Can anyone help me? Or send me a link to where I can find what I need? Any help will be greatly appreciated.
Diesel mic
Discussion in 'CB Radio Forum' started by Runningbear2000, Nov 16, 2015.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Which wires broke loose?
-
Pin number 1 is shield/ground
pin number 2 is audio.
pin number 3 is transmit.
PIN number 4 is receive.
You might be able to use logic to figure it out if you follow those wires from the plug back into the microphone.Blaskowitz Thanks this. -
When you push the button pin 1 grounds to pin 2 through the microphone element and pin 1 grounds directly to pin 3. When you release the button pin 1 grounds directly to pin 4.
Blaskowitz Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.