Hello.after taking my 2012 freightliner cascadia in to do all the bushings front and back and alignment I got all kinds of engine codes .it reads engine 2 spn 000636 position sensor 3,8,11,15 the mechanic said it happens when they lift the truck .but they haven gone away I clears and they still come back .both check engine lights are still on wont turn off.can anyone help out.
Engine light on,both of them .
Discussion in 'Experienced Truckers' Advice' started by bully1724, May 30, 2016.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
How far from the mechanic are you. Can he hook up a laptop and clear the code.
If not. Disconnect the negative battery terminals for a couple minutes, at least 30 seconds. See if this will clear the code. There may be a way to key on without starting truck that may help also, not sure.
I'm just guessing. I don't have your type of truck.
Call a Freightliner dealer
Good luck. -
-
Freightliners usually have a 'nighttime' switch in the cab, so you can disconnect power without having to get into the battery compartment.
-
-
-
Honestly probably reflects badly on my part but i mostly ignore check engine lights on crapcadias. Ive had 3 of those pieces of garbage- 2015 70k miles, and 2 brand new 2016 9k and 2016 1200 miles. All three of them constantly have the check engine light coming on. Im not spending all of my working hours in the shop. I dont get paid for that.
bigmotor1212 Thanks this. -
-
Last time that happened on my 2010 it threw a egr fault code. I jiggled the rod connected to the egr and the lites went off.
I have cleared em by turning off that master switch mentioned above also. Good luck. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2