Ground issue, maybe?

Discussion in 'Peterbilt Forum' started by blessed2b, Sep 16, 2016.

  1. blessed2b

    blessed2b Bobtail Member

    6
    1
    Jun 1, 2014
    0
    07 Pete 340 cummins ISC 8.3L...ac works great until I turn on headlights or clearance lights, then just blows hot air...I can turn it on defrost & then compressor kicks in fine & blows cold out defrost vents but then I turn on ac switch & I lose instrument panel lights...unedumacated guess is a ground issue but I'm not sure where to check...I'm a decent parts changer but not a technician nor electrician & not real keen on reading a schematic even if I had one...any hints on where to check connections or any other help would be GREATLY appreciated, these hot Texas nights are killing me.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. beemergary

    beemergary Light Load Member

    229
    112
    Apr 11, 2014
    0
    Doesn't sound like a part changer job. Also can't believe a ground problem. Can't think how one could backfeed into another. Someone been splicing into wireing?
     
  4. DL550CAT

    DL550CAT Road Train Member

    1,427
    1,481
    Oct 18, 2009
    Waynesburg, Pa
    0
    Strange problems like that are very much a sign of a ground issue. Not saying that is what your problem is.

    I'd look around behind the dash. If you can't find anything I'd try grounding the panel lights with a jumper to a known good ground. See if that changes anything.
     
    blessed2b Thanks this.
  5. cdub304

    cdub304 Light Load Member

    162
    68
    Dec 7, 2009
    Rockford,IL
    0
    take dash down and check wires...... sounds like you got a bare wire somewhere. trace wire lights n ac switch more than likely thats your problem
     
    blessed2b Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.